WT901SD | manual v0707 | http://wiki.wit-motion.com/english
3 Offline Record
3.1 Instructions
There will be a 16G SD card and a SD card reader came with the sensor as
accessory.
WT901SD Playlist
Offline record requires the configuration of calibrating time. So the data will
have a “Time” to know when the data starts to be recorded. There will be a 16G
SD card and a SD card reader came with the sensor as accessory.
((Please refer to Chapter 2.4.4)
Step 1: Insert the SD card into the memory card slot on the back of the module
Step 2. Power the module by a 3.3-5V battery. After the module is powered on
(1~2S), the module starts to work and stores data.
Step 3: The data will be stored in the TXT file in hexadecimal output.
To Next Page
Loading...
