Initial setup
9
^6
6
6
5
> Place the tank lid on the water tank.
> Pour cold tap water through the fi lling opening up to the maximum marking (5).
When using the water tank, the tilting device (6) must be tilted forward.
> Tip the tilting device (6) forward if required.
> Insert the water tank into the appliance and close the door.
The cleaning button fl ashes blue to prompt you about rinsing.
2.4 Rinsing for fi rst time of use.
> Ensure that the empty pad cassette is pushed in.
> Turn the locking knob to position z.
> Place a collecting vessel with a volume of at least 0.5 litres centrally under all spouts.
Filling the water tank
Inserting the water
tank
To Next Page
Loading...
