Measures for problem rectifi cation
41
Problem Rectifi cation measure
No water fl ows Water tank empty?
>Fill the water tank with cold water.
Suction cap not mounted correctly?
>Check that the suction cap is fi rmly seated at the bottom of the water tank. Even
if you do not use a water fi lter, the suction cap must be installed fi rmly in place.
Cups are fi lled unequally
on the left and right.
Small differences in the fi lled volumes can never be completely
avoided. After prolonged usage, the cup volumes get equalised.
Installation surface not horizontal?
>Place your coffee pad machine on a horizontal surface.
Cup volumes are gradually
getting smaller.
Always turn the locking knob as much as possible to the right.
>Regularly check that the central opening of the pad
cassette is clear to avoid blockage.
>Descale the coffee pad machine in good time.
>Check that the suction cap at the bottom of the water tank is fi rmly seated. Even
if you do not use a water fi lter, the suction cap must be installed fi rmly in place.
>Carry out a rinsing operation to remove air from below the suction cap.
No milk output,
although there is milk
in the container
Carry out a rinsing operation.
>Clean the steam nozzle.
To Next Page
Loading...
