WMF 2000S - Page 6

6
WMF 2000 S Service Manual Edition 11/2010
WMF 2000 S Service Manual
Recommendation:
 Adjust foam quality and temperature using nozzle and
under  Setting  foam quality
 Set recipes or transfer the given standards to the
machine
 Set button functions and beverages according to
customer specifications
(Settings or “KonfigTool“
 beverage data)
 Set cup volumes (Setting)
Hint: If the filling amount setting is too small for large
vessels, use the "pot" recipe
 Enter service point
(only possible with “KonfigTool”).
 Save data in service memory (Service Program
 Machine data  Standards  CustomerService)
 Backup machine data on laptop
Before regular operation:
 Rinse the pipes, dispense three cups of hot water
 Push the steam button for about 10 seconds
 Perform the cleaning cycle
Fine setting of beverages under
changing recipes:
Amount of coffee powder
Amount of water
Amount of foam
Amount of milk
Foam quality
Additional settings after the
service PIN is entered