Wolf 106302 - Unpacking and Initial Checks

Unpacking
WARNINGl
To
prevent
accidental
starting
that could cause
possible
serious
personal
injury,
assemble all
parts
to
your pillar
drill before
connecting
it to
power
supply.
The
pillar
drill should
never be connected
to
power
supply
when
you
are
assembling parts,
making adjustments,
installing
or
removing
drill
bit,
or when not in use.
WARNING] if
any parts
are
missing,
do
not
operate
this tool until the
missing
parts
are
replaced.
Failure
to do so could result In serious
personal
injury.
‘
Carefully
remove all
parts
and
lay
them on a
flat,
stable
surface
-
Remove
all
packaging
and
shipping
materials
-
Do not
discard the
packing
materials
(save
should the
pillar
drill need to be
repaired
in the
future).
-
Make sure the contents
are not
damaged.
-
if
you
find that
any part
is
damaged please
contact our after sales team
on: 0330 123 0001
'
Ensure
you
have all
the tools
required
for
assembly
and
operation.
This includes
personal
CE
approved protective equipment.
NOTE: If
any parts
are
damaged
or
missing,
do not
attempt
to
plug
in the
power
cord and turn the switch on until the
damaged
or
missing parts
are obtalned and are installed
correctly.
Wolf". 106302
.
Page
12