Wolf MGK-2 Series User Manual

Art.-Nr. 3064285_201502 Änderungen vorbehalten
Wolf GmbH · Postfach 1380 · D-84048 Mainburg · Tel. +49(0)8751/74-0 · Fax +49(0)8751/ 741600 · Internet: www.wolf-heiztechnik.de
DE
Anleitung für Austausch
Parameterstecker MGK-2
GB
Replacement instructions
Boiler coding cards MGK-2
ES
Instrucciones de sustitución
Clavija de parámetros MGK-2
PL
Instrukcja wymiany wtyczki
parametrowej MGK-2
IT
Istruzioni per sostituzione
scheda parametri MGK-2
RU
Инструкция по замене
параметрического штекера MGK-2
GR
Οδηγίες για την αλλαγή του
φις παραμέτρων MGK-2
SK
Návod na výmenu
Dátový konektor MGK-2
CZ
Návod na výměnu
Parametrovací konektor MGK-2

Wolf MGK-2 Series Specifications

General

Brand	Wolf
Model	MGK-2 Series
Category	Boiler
Language	English

Summary

Replacement Instructions for Parameter Stecker MGK-2

Electrical Safety and Mains Isolation Warning

Warning about electrical hazards due to non-isolated mains supply and requirement for qualified personnel.

Installation and Replacement Procedure

Initial Disconnection and Component Access

Steps 1-4 cover powering off, circuit breaker control, and accessing internal components for MGK-2 models.

Component Replacement and Reassembly

Steps 5-9 detail component removal, replacement, circuit breaker reset, and powering on the unit.

BCC Copying Procedure

Step 10 describes initiating BCC copying via the device interface, followed by verification.

Technical Specifications and Identification

MGK-2 Model Identification and Specifications

Details technical specifications and identification for MGK-2-130-300 and MGK-2-390-630 models.