11
3) Avoid going over curbs
Since e-bikes are much heavier than regular bikes, whenever you hit a bump on
the road or go over the curb, the bike components receive much more shock.
Over time, it can cause damage to your motor and other e-bike parts. Besides,
the rim tires are much more likely to bend.
If you’re riding on the bumpy road, we encourage you lift up from your seat to
minimize the pressure you’re putting on the motor and the rest of your bike. We
also encourage you to get o your bike when you have to go over the curb. Trust
us, it would signicantly prolong the life of your e-bike.
4) Regularly clean your bike
Dirt and mud can cause damage to your bike’s mechanical and electrical
components, so it’s a good practice to clean your bike regularly. Remember to
not use water under pressure, as it can penetrate in the internal parts of your
e-bike like bearings and motor and cause damage or rusting. Instead, use a
damp cloth and a bike-friendly cleaner.
Every few months bring your e-bike to a registrered Wol dealer to perform
safety check ups, and tune ups if necessary.
To Next Page
Loading...