WOLFF VEGA - Walking mode and Parameter settings; Walking mode (6 km); Parameter setting

To Next Page

To Previous Page

Press and hold DOWN button for 2 second can get into walking mode, out of the

mode when release the button.

* This feature needs to be supported by controller.

Walking mode (6km)

Parameter setting

Press M button (press no less than 2 seconds) can get into setting menus, press

UP/DOWN buttons to change the parameter setting, press M button can switch

to next item. Press M (press no less than 2 seconds) button will exit from menu.

• Display will automatically quit menu when there is no operation for 30

seconds.

• For safety reasons, display can’t get into MENU when riding.

• Display will quit MENU when start riding.

The order of parameters are as follow.