10
Care and Maintenance
Taking proper care of your e-bike can prolong its lifespan by many years, so it’s
important to remember a few basic methods of maintaining your e-bike.
1) Pump your tires
E-bikes are on average heavier than regular bikes, so it’s important to remember
to keep your tires inated. Having inated tires makes it much easier to pedal
and accelerate, helping your motor do its work. Your electric bicycle will benet
with increased range when tires are inated and rolling resistance is decreased.
Besides, inated tires lower the risk of getting ats and protect your rims from
being damaged, especially if you hit a pothole or a curb.
Look at the side of your tire to nd the PSI range – the amount of air pressure
you should aim for when pumping your tires. Tire pressure has a minimum
and maximum range. Do not exceed either limit as it may cause uncomfortable
riding, premature wear on the tires, inner tubes, wheels, and bicycle overall.
Check your tire pressure frequently, ideally a minimum of twice a month and
top up as require. At the time of checking your tire pressure also check for nicks,
cuts, debris, and wear on the tread and sidewall of the tires.
2) Keep your chain clean and lubed
Your drivetrain will perform better and last longer when it is kept clean and
lubricated. It is suggested that a light duty oil be applied to the chain and pivot
points of the derailleur every 200km (125 miles) or as suggested by the lubricant
manufacturer.
Plus, chains tend to wear out and stretch overtime. Make sure to change your
chain before it’s too worn out to avoid damage to the rest of the drivetrain.