6
Carton Contents
1. Assembled bicycle wrapped with padding and packaging material
2. Front fender
3. Box with one pair of pedals and front lamp
4. Box with the charger and cord
Assembly Instructions
Required Assembly Tools
1. 3mm Allen key
2. 4mm Allen key
3. 5mm Allen key
4. 6mm Allen key
5. #2 Phillips screwdriver
6. 15mm wrench
7. 4mm wrench
Assembly Steps
1
Open carton. Please be certain to guard yourself against the staples.
Remove bicycle from box. This may be easier with two people.
Lean the bicycle against something that will not move. Place on a non-slip
oor. Carefully remove all wrapping and padding material from the bicycle.
Recycle where facilities exist.
Apply a thin lm of grease inside the frame’s seat tube. Insert seatpost and
adjust the seatpost quick release to hold the post rmly in place.
Clamp bicycle by the seatpost. If the bicycle has a suspension seatpost do
no clamp by or above the collar of the suspension mechanism.
2
To Next Page
Loading...