Safety & General Information
Cutting Capacity
Safety & General Information 25doc101703 1-9
1
1.7 Cutting Capacity
See Table 1-3. The log size capacities of the LT25 sawmill are listed below.
See Table 1-4. The performance capacity of the LT25 sawmill is listed below. Peak cut-
ting rates are measured in 12” (30 cm) wide red oak and represent the capability of the
sawmill only. Rates based on using Tru-Sharp 1 1/4” x .042 blades.
Max.
Diameter
1
1
Maximum log capacity for a basic mill is 4400 lbs. (1996 Kg).
Max.
Length
1
LT25 32" (81 cm) 16' 8" (5.1 m)
LT25L 32" (81 cm) 21’ (6.4 m)
TABLE 1-3
Model Cutting Rate
LT25/25L G15 17 ft./min. (5.2 m/min.)
TABLE 1-4
To Next Page
Loading...
