Need help?Do you have a question about the Wood-mizer LT28 and is the answer not in the manual?
General| Engine | Electric |
|---|---|
| Log Capacity | 28" (71 cm) diameter |
| Weight | 2, 200 lbs |
| Blade Width | 1.25 inches |
| Power Options | Electric |
| Engine Power | 25 HP |
Explains the purpose and scope of the manual and provides general company information.
Provides contact information, office hours, and payment methods for customer service.
Details dimensions, weights, cutting capacity, power unit options, and fuel consumption.
Explains the meaning of DANGER, WARNING, CAUTION, IMPORTANT, and NOTE signals.
Outlines general safety rules, reading the manual, and owner responsibilities for compliance.
Warns about potential hazards during sawmill setup, like inclines and outrigger use.
Details the purpose, preparation, and sequence for safe lockout procedures.
Instructions for preparing a firm, level area and anchoring a stationary sawmill.
Warnings and considerations for setting up a portable sawmill on various surfaces and inclines.
Step-by-step guide on safely removing and installing a bandsaw blade.
Instructions for setting correct blade tension using the indicator bolt and tensioner handle.
Steps to align the blade on the wheels for proper tracking.
Guide on safely loading, turning, and clamping logs onto the sawmill bed.
Instructions on how to adjust the cutting head height using the up/down crank.
Explains manual and optional power feed systems for moving the saw carriage.
Step-by-step guide for performing a cut on a log.
Explains how to use the blade height scale for accurate cuts.
Provides estimated life expectancy for common replacement parts.
Guide on removing sawdust from blade housings and chutes for safety and maintenance.
Procedures for cleaning, lubricating, and maintaining carriage tracks and wipers.
Steps for adjusting drive belt tension and checking throttle linkage.
Safety precautions and steps for charging the sawmill battery.
Lists common sawing problems, their causes, and solutions.
Troubleshooting steps for issues related to the power feed system.
Steps for performing routine alignment to solve sawing issues.
Adjusting the saw head to compensate for droop when cutting wide logs.
Adjusting blade guide arms for proper blade support and cut accuracy.
Outlines procedures for complete sawmill alignment, starting with frame setup.
Procedure to ensure blade wheels are level vertically and horizontally.
Steps to adjust bed rails for proper alignment.
To Next Page
