Need help?Do you have a question about the Wood-mizer MF130 E3S and is the answer not in the manual?
General| Brand | Wood-mizer |
|---|---|
| Model | MF130 E3S |
| Category | Industrial Equipment |
| Language | English |
Overview of the MF130 Moulder's features and capabilities, including its cast iron base and sliding table.
Identifies and illustrates the main parts and controls of the MF130 Moulder.
Explains the meaning of various danger, warning, and caution symbols used in the manual.
Details essential safety precautions, personal protective equipment, and operational guidelines.
Step-by-step instructions for installing the optional XY table onto the sliding table.
Critical checks to perform before starting the MF130 Moulder, including setup and safety.
Describes the functions of the MF130 Moulder's control panel buttons, including emergency stop.
Information and safety regarding the moulder's cutter, including rotation direction.
Procedures for adjusting the cutter's position, height, and other settings.
Steps to modify the cutter's rotational speed by changing belt positions on pulleys.
Estimated lifespan of common replacement parts like the drive belt.
Instructions for cleaning sawdust and chips from the machine every eight hours of operation.
Routine upkeep tasks including cleaning resin and lubricating parts.
Guidelines for storing the machine when not in use for extended periods.
Procedures for inspecting critical safety features on CE-marked models.
Checks for the emergency stop button and its circuit functionality.
Inspection of the safety switch located on the belt gear cover.
Provides the physical dimensions of the MF130 moulder in millimeters.
Details on the moulder's electrical types, motor specifications, and noise level.
Technical specifications for dust and chip extraction systems compatible with the MF130.
To Next Page
