Wood-mizer Accuset User Manual

Accuset
Safety, Operation, Maintenance
& Parts Manual
ASET for ’97+ LT30/40/HD rev. A.00 - E.06
Safety is our #1 concern! Read and understand
all safety information and instructions before oper-
ating, setting up or maintaining this machine.
May 2000
Form #987

Wood-mizer Accuset Specifications

General

Brand	Wood-mizer
Model	Accuset
Category	Industrial Equipment
Language	English

Summary

Accuset Manual Overview

Accuset Safety, Operation, and Maintenance Manual

Comprehensive guide for the Accuset system.

Manual Version and Compatibility

Details the manual version and compatible sawmill models.

Critical Safety Precaution

Emphasizes the importance of reading all safety information before use.

Accuset Installation Procedure

1.1 Pre-Installation Procedure

Steps to prepare the sawmill before installing the Accuset.

1.2 Sensor Installation (Rev. A.01+)

Instructions for installing the sensor for specific Accuset revisions.

1.3 Sensor Installation (Rev. A.00)

Instructions for installing the sensor for an older Accuset revision.

1.4 Wiring Preparation

Steps to prepare wiring for the Accuset installation.

1.5 Wiring Installation for Super Sawmills

Specific wiring instructions for Super model sawmills.

1.6 Wiring Installation for Standard Sawmills

Specific wiring instructions for Standard model sawmills.

1.7 Accuset Final Installation

Final steps for completing the Accuset installation.

Accuset Setup and Operation

2.1 Control Setup

Configuration of the Accuset control unit and its display.

2.1.1 Contrast Adjustment

Adjusting the LCD display contrast for optimal visibility.

2.1.2 Standard Sawmill Model Configuration (Rev. E.02+ Only)

Reprogramming Accuset for standard sawmills.

2.1.3 Startup Configuration

Initial configuration steps for a new or replaced Accuset control.

2.1.4 Auto-Bump (Rev. E.O4+ Only)

Activating and configuring the automatic bump feature.

2.1.5 Other Settings

Customizing settings like kerf and language.

2.1.6 Restore Factory Defaults

Resetting Accuset settings to their original factory values.

2.2 Mode Selection

Choosing between Manual, Auto-Down, Auto-Up, Pattern, and Reference modes.

2.3 Using Auto-Down Mode

Operating the Accuset in Auto-Down mode for cuts.

2.4 Using Auto-Up Mode

Operating the Accuset in Auto-Up mode for raising the saw head.

2.5 Using Pattern Mode

Utilizing pattern mode for programmed cutting sequences.

2.6 Using Reference Mode (Rev. B.00+ Only)

Setting and using reference positions for saw head control.

Accuset Troubleshooting

3.1 Common Problems

List and diagnosis of frequent issues with the Accuset system.

3.2 Accuset Display Problems

Troubleshooting issues related to the Accuset control display.

3.2.1 Control Panel Replacement

Procedure for replacing the Accuset control panel.

3.2.2 Resetting the Accuset

Steps to reset the Accuset to factory default settings.

3.3 Up/Down Control Lights

Interpreting LED indicators for up/down control functions.

3.3.1 MOSFET Panel Test

Diagnostic test for the MOSFET panel.

3.3.2 Replacing the MOSFET Panel

Procedure for replacing a defective MOSFET panel.

3.4 Accuracy Problems

Diagnosing and resolving issues with saw head positioning accuracy.

3.5 Sensor LED Lights (Rev. D.02 - E.02 only)

Understanding sensor LED indicators for diagnostics.

Accuset Replacement Parts

4.1 Accuset Kit, Complete

List of components for the complete Accuset installation kit.

4.2 Sensor Assembly (Rev. E.01+)

Parts list and diagram for the Accuset sensor assembly (Rev. E.01+).

4.3 Sensor Assembly (Rev. A.01 - E.00)

Parts list and diagram for the Accuset sensor assembly (Rev. A.01 - E.00).

4.4 Sensor Assembly (Rev. A.00)

Parts list and diagram for the Accuset sensor assembly (Rev. A.00).

4.5 Control Assembly (Rev. E.03 - E.06)

Parts list and diagram for the Accuset control assembly (Rev. E.03 - E.06).

4.6 Control Assembly (Rev. B.00 - E.02)

Parts list and diagram for the Accuset control assembly (Rev. B.00 - E.02).

4.7 Control Assembly (Rev. A.00 - A.03)

Parts list and diagram for the Accuset control assembly (Rev. A.00 - A.03).

4.8 Cover Assembly

Parts list and diagram for the Accuset control cover assembly.