www.WoodMaxx.com
7
SAFETY INFORMATIONSAFETY INFORMATION
Adjustments and Inspection
• CHECK pins that attach backhoe to tractor and all pivot pins for tightness several
times daily, replace any parts that are bent, broken or missing.
• ALWAYS engage safety locks before servicing backhoe.
• DO NOT oil, grease, or adjust the backhoe while it is in motion.
For greasing, see Lubrication section on page 31 for details.
• DO NOT change any backhoe relief valve settings. They are factory set for best
backhoe performance and safety. The main relief valve is set to 16 MPA, 2310 PSI.
• PROTECT YOUR EYES - WEAR SAFETY GLASSES.
• GUARD AGAINST INJURY when driving connecting pins or performing any repair
in which particles can chip.
A Note to All Users
List of warnings and cautions cannot be all-inclusive. If situations occur that are not
covered by this manual, the operator must apply common sense and operate this
Backhoe Attachment in a safe manner. If you have any questions, please contact
WoodMaxx at (855) 966-3629.
To Next Page
Loading...