Safety 7
MAN1177
(
07/28/2023
)
■ Do not modify or alter or permit anyone else to
modify or alter the equipment or any of its com-
ponents in any way.
■ Your dealer can supply original equipment hy-
draulic accessories and repair parts. Substitute
parts may not meet original equipment speci-
cations and may be dangerous.
■ Always wear relatively tight and belted clothing
to avoid entanglement in moving parts. Wear
sturdy, rough-soled work shoes and protective
equipment for eyes, hair, hands, hearing, and
head.
■ Do not allow bystanders in the area when op-
erating, attaching, removing, assembling, or
servicing equipment.
■ Make sure attachment is properly secured, ad-
justed, and in good operating condition.
■ Never perform service or maintenance with en-
gine running.
■ Keep all persons away from operator control
area while performing adjustments, service, or
maintenance.
■ Tighten all bolts, nuts, and screws to torque
chart specications. Check that all cotter pins
are installed securely to ensure equipment is in
a safe condition before putting unit into service.
■ Make sure all safety decals are installed.
Replace if damaged. (See Safety Decals section
for location.)
■ Make sure shields and guards are proper-
ly installed and in good condition. Replace if
damaged.
■ Use a suitable lifting device of sufcient capac-
ity. Use adequate personnel to handle heavy
components.
STORAGE
■ Follow manual instructions for storage.
■ Keep children, bystanders and animals away
from equipment and storage area.
SAFETY RULES
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
To Next Page
Loading...
