What to do if Woodward Control Unit goes into emergency stop?
If your Woodward Control Unit experiences an emergency stop, check if the emergency stop button works properly, verify whether the starting battery's positive pole is connected to the emergency stop input, and check whether the circuit is open.
How to fix abnormal RS485 communication on Woodward Control Unit?
If RS485 communication is abnormal in your Woodward Control Unit, check the connections, ensure the COM port setting is correct, verify that RS-485 connections of A and B are not reverse connected, check if the RS485 transfer model is damaged, and check if the communication port of the computer is damaged.
What causes genset shutdown in Woodward Control Unit?
If your Woodward Control Unit experiences a genset shutdown, check if the water/cylinder temperature exceeds the limits, the genset AC voltage, and the DC fuse.
Why is the starter not responding on my Woodward Control Unit?
If the starter of your Woodward Control Unit is not responding, check the starter connections and the starting batteries.
What to do if my Woodward Control Unit fails to start?
If your Woodward Control Unit fails to start, check the fuel oil circuit and its connections, the starting batteries, and the speed sensor and its connections. Also, refer to the engine manual for further guidance.
General| Type | Generator Controller |
|---|---|
| Frequency | 50/60 Hz |
| Digital Inputs | 8 |
| Digital Outputs | 6 |
| Analog Outputs | 2 |
| Display | Graphic LCD |
| Relay Outputs | 6 |
| Operating Temperature | -20 to +70 °C |
| Communication Ports | RS-485 |
| Protection | Over/Under Voltage, Over/Under Frequency, Over Current, Short Circuit, Reverse Power |
| Protection Class | IP20 |
Details the manual's content, revision history, and safety symbols.
Covers intended use, personnel qualifications, and general hazard warnings.
Describes the intended use of the easYgen unit as per manual and specifications.
Details status screens on HMI and access via ToolKit-SC software.
Describes operating and display elements on the easYgen-1700 front panel.
Explains alarm signaling, acknowledgment, and operation modes (AUTO, MANUAL, STOP).
Covers START/STOP, transition procedures, and troubleshooting guidance.
Details alarm classes, warnings, shutdown, trip, and stop alarms.
Lists conditions triggering shutdown, trip, and stop alarms for the generator.
Provides definitions for common terms and abbreviations used in the manual.
An alphabetical index to locate specific topics and keywords within the manual.
To Next Page
