Need help?Do you have a question about the Woodward ProTech-SX 8237-1243 and is the answer not in the manual?
General| Overspeed Protection | Yes |
|---|---|
| Redundant Power Supplies | Yes |
| Vibration Monitoring | Optional |
| Applications | Gas turbines, steam turbines |
| Communication | Ethernet, RS-232, RS-485 |
| Input Voltage Range | 18 to 32 VDC |
| Operating Temperature Range | -40°C to +70°C |
| Communication Protocol | Modbus RTU |
Warning regarding independent shutdown devices for overspeed conditions.
Warning concerning emergency shutdown procedures during start-up.
Specific steps to avoid ESD damage to electronic components.
Detailed description of the ProTech-SX safety PLC and its core functions.
Discusses the diverse applications for the ProTech-SX safety system.
Step-by-step process for mechanical and electrical installation.
Parameters for speed input channels, accuracy, and cable length.
Specifications for passive magnetic pickup unit inputs.
Specifications for inputs configured as analog.
Specifications for inputs configured as discrete.
Guide to programming and configuring the ProTech-SX using PCT or front panel.
Describes the two speed inputs and their configuration options.
Wiring details for configurable inputs used as discrete inputs.
Details on the two dedicated trip relay outputs.
How the alarm latch functions and is indicated.
Configuration of de-energize or energize to trip safe states.
To Next Page