Need help?Do you have a question about the Woodward ProAct III and is the answer not in the manual?
General| Input Voltage | 24 VDC |
|---|---|
| Enclosure Rating | IP20 |
| Actuator Type | Electro-hydraulic |
| Power Supply | 24 VDC |
| Outputs | Analog, Digital |
| Communication Protocols | Modbus RTU |
| Operating Temperature | -40°C to +85°C |
| Operating Temperature Range | -40°C to +85°C |
| Dimensions | Varies by model |
| Applications | turbines |
Instructions for unpacking, mounting, and environmental considerations for the ProAct driver box.
Requirements for low-impedance power supply, connection methods, and precautions during engine shutdown.
Procedures and precautions for setting driver potentiometers like span, offset, and bandwidth.
Setting driver span and offset for full actuator stroke, defining relationship between command signal and position.
Tips for identifying and resolving problems related to linkage, friction, backlash, and actuator stroke.
Information required for requesting technical assistance, including general, prime mover, and control/governor details.
To Next Page