Feeding setting guide
Set the feeder using the following instructions.
The default wheel is the large one. There is also a small
wheel, and you can change the wheel when needed.
Note:
When you are setting Hour or Minute, keep
holding the “Time” button.
Press and hold the “Manual” button for 3 seconds. The rotor will
rotate one portion. Repeat two more times. Each time it will feed
one portion. This means the machine is working correctly.
a.
Check the manual feeding option and function
Holding the "Time" button, press the "Hour" button to set the
current hour. And holding the "Time" button, press the "Minute"
button to set the time.
For example: Current time is 12: 50
b.
Set the current time
5
To Next Page
Loading...
