Worcester danesmoor 50/70 User Manual

DANESMOOR
12/14, 15/19, 20/25, 26/32, 32/50, 50/70
CONVENTIONAL FLUE AND ROOM SEALED BF
FLOOR STANDING OIL-FIRED PRESSURE JET APPLIANCES
INSTALLATION AND
SERVICING INSTRUCTIONS
BOILER OUTPUT
Hot Water and Central Heating
12/14 MINIMUM 12 kW (41,000 Btu/h)
MAXIMUM 14 kW (48,000 Btu/h)
15/19 MINIMUM 15 kW (51,000 Btu/h)
MAXIMUM 19 kW (65,000 Btu/h)
20/25 MINIMUM 20 kW (68,000 Btu/h)
MAXIMUM 25 kW (85,000 Btu/h)
26/32 MINIMUM 26 kW (89,000 Btu/h)
MAXIMUM 32 kW (109,000 Btu/h)
32/50 MINIMUM 32 kW (109,000 Btu/h)
MAXIMUM 50 kW (170,000 Btu/h)
50/70 MINIMUM 50 kW (170,000 Btu/h)
MAXIMUM 70 kW (239,000 Btu/h)
THESE INSTRUCTIONS APPLY TO UK MODELS ONLY
THESE INSTRUCTIONS ARE TO BE LEFT WITH THE APPLIANCE

Worcester danesmoor 50/70 Specifications

General

Output	50, 000 to 70, 000 BTU/h
Fuel Type	Oil
Efficiency	92%
Mounting	Floor Standing
Efficiency Rating	A
Warranty	2 years

Summary

Oil Supply

Storage Tank and Pipework Rules

Oil storage tank installation requirements and pipework prohibitions.

Fuel Line Components and Installation

Components to be fitted in the fuel line and oil supply installation.

Electrical System

Mains Wiring and Terminal Access

Mains wiring, cable connections, and steps to access terminal strip.

Installation Procedures

Heating and Oil Supply Installation

Commissioning the Appliance

Pre-Commissioning Checks and Burner Setup

Checking electrical, burner, and installation components before commissioning.

Burner Bleeding, Adjustment, and Operation

Routine Cleaning and Inspection

Pre-Service Checks and Burner Cleaning

Performing pre-service checks and detailed burner cleaning procedures.

Boiler Cleaning and Component Checks

Fault Finding Guide

Lockout, Ignition, and Start-up Failures

Troubleshooting lockout, ignition failure, and burner start issues.

Operational Faults and Smoke Issues

Troubleshooting boiler operation, high smoke, and oil smell issues.