Worcester Greenstar Highflow 440CDi User Instructions & Customer Care Guide

Supplied By www.heating spares.co Tel. 0161 620 6677
USER INSTRUCTIONS & CUSTOMER CARE GUIDE
USING YOUR
APPLIANCE
OPERATING THE APPLIANCE
8 716 115 220a (07.2008)
OPERATING THE APPLIANCE
10
FAULT CONDITION
In the unlikely event of a fault occurring while
the appliance is in operation:
The reset button will flash once per second
and the mains indicator (blue light) will flash
also. The display shows a fault code.
To reset boiler press the reset button.
The reset button will no longer be illuminated
and the mains indicator will stop flashing.
The boiler will function normally, dependent
on programmer and room thermostat settings.
If the fault remains and cannot be cleared by
pressing the reset button, or if fault persists
contact British Gas for assistance, giving a
description of the fault and, if possible, the
fault code from the display.

Worcester Greenstar Highflow 440CDi Specifications

General

Model	Greenstar Highflow 440CDi
Category	Boiler
Output	40kW
Domestic Hot Water Output	40kW
ERP Rating	A
Fuel Type	Natural Gas
Central Heating Flow Temperature Range	30°C to 80°C
Warranty	5 years