Workzone 45151 - Emptying the dust tank; Cleaning the reusable cloth filter and foam filter

Cleaning and maintenance
18
NOTICE!
Risk of damage!
Improper handling of the vacuum may result in damage to the
vacuum.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles, or sharp or metallic cleaning utensils such as
knives, hard scrapers and the like. They could damage the
surfaces.
− Do not open the filter cage for cleaning.
Emptying the dust tank
1. Switch the vacuum off, unplug the power cord
3
and let the vacuum cool off
completely.
2. Undo the latches
5
and remove the motor head
4
from the vacuum with the
handle
2
(see Fig. A).
3. Replace the disposable filter bag
15
when it is full (see chapter “Replacing
filters”).
4. Clear all dirt or debris from the dust tank
7
.
5. Replace the motor head on the dust tank and engage the latches.
Make sure the latches snap tightly in place and are securely engaged.
Cleaning the vacuum
1. Switch the vacuum off, unplug the power cord
3
and let the vacuum cool off
completely.
2. Use a damp cloth to wipe off the motor head
4
, including its underside around
the filter cage
19
.
3. Clean the dust tank
7
with warm water and mild soup. Rinse with clean water
and let all parts dry completely.
Cleaning the reusable cloth filter and foam filter
The reusable cloth filter
16
and foam filter
18
should be regularly cleaned for best
performance.
1. Switch the vacuum off, unplug the power cord
3
and let the vacuum cool off
completely.