Cleaning
16
Using lamp without connection to electric power/
Switching on the lamp
LED on the front side
− To switch the lamp on, pull the lamp apart.
The LED on the front side
4
automatically switches on when pulled out.
− To switch the lamp off, push the lamp back together again.
LED on the top
− To switch the lamp on and off, press the On/Off switch
6
.
The LED on the top side
1
will switch on.
Adjusting the LED on the top
− To tilt the LED on the top side to the side, press the locking button
5
and tilt the
head of the lamp.
− To lock the LED on the top side back into place, place the head of the lamp in the
starting position until you can hear it click into place.
Cleaning
NOTICE!
Risk of short circuit!
Water or other liquids that have penetrated the housing may cause
a short circuit.
− Never submerge the lamp in water or other liquids.
− Make sure that no water or other liquids penetrate the housing.
− Before cleaning, pull the adapter out of the socket or the
cigarette lighter.
To Next Page
Loading...
Need help?
General