Disposal
19
Car adapter
Model: SYZS050500
Input voltage: 12–24VDC
Output power: 5 VDC, 500 mA
Fuse: F2AL250V
Disposal
Disposing of the packaging
− Dispose of the packaging separated into single type materials. Dispose of cardboard
and carton as waste paper and film via the recyclable material collection service.
− Dispose of the plastic packaging sorted into single-type materials by making
them available to the collection service for recyclable materials.
Disposing of the lamp
− Should the lamp no longer be capable of being used at some point in time,
dispose of it in accordance with the regulations in force in your city or state.
− Please ensure your recycling information applies to local regulations and the EPA
recommendations (www.epa.gov).
Batteries and rechargeable batteries must not be disposed of with household waste!
As the end user you are required by law to bring all batteries and rechargeable bat-
teries, regardless whether they contain harmful substances* or not, to a collection
point run by the communal authority or borough or to a retailer, so that they can be
disposed of in an environmentally friendly manner.
* labeled with: Cd = cadmium, Hg = mercury, Pb = lead
To remove the rechargeable battery, you will need a Phillips screwdriver and a wire
cutter or pair of scissors.
1. Pull the lamp apart.
2. Loosen the fastening ring
3
by turning it counter-clockwise.
3. Pull the LED on the front side
4
out completely.
4. Remove all four Phillips-head screws using a Phillips screwdriver.
5. Open the housing of the lamp.
6. Sever the red and blue connecting wires of the battery one by one using the wire
cutter or scissors.
7. Remove the rechargeable battery.
To Next Page
Loading...
Need help?
General