Workzone HCE2400 - Layout; Scope of Delivery

AUS
Introduction/Layout/Scope of delivery HCE2400
10
AFTER SALES SUPPORT
 support@scheppach.com.au

1300 855 831
MODEL: HCE2400 PRODUCT CODE: 62005 09/2018
In addition to the safety notes contained in the present operating instructions and
the special regulations of your country, the generally recognised technical rules for
the operation of this high pressure washer must be observed.
II. Layout (Fig. 1/1.1)
1 Handle with holder for high pressure hose
2 High pressure hose
3 Holder for mains cable
4 On / o󰀨 switch
5 Connection for high pressure hose
6 Lance holder
7 Accessories holder
8 Cleaning agent container
9 Transport wheel
10 Water inlet connection
11 Nozzle cleaning needle
12 Quick connector
13 Extension
14 Gun
15 Variable nozzle
16 Screw
III. Scope of delivery
High pressure washer (1x)
Handle with holder for high pressure hose (1x)
High pressure hose (1x)
Holder for mains cable (1x)
Lance holder (1x)
Cleaning agent container (1x)
Nozzle cleaning needle (1x)
Quick connector (1x)
Extension (1x)
Gun (1x)
Variable nozzle (1x)
Screw (2x)
Warranty Certicate (1x)
Manual (1x)