Workzone SD1600V User Manual

Safety
information
SD1600V
10
1
12
13
14
15
16
17
18
19
They may get
caught
in
moving
parts.
Rubber
gloves
and
non-slip
shoes are
recommended when
working
outdoors.
Wear a hair net if
you
have
long
hair.
Use
personal
safety equipment.
Wear
safety goggles.
Use a dust
mask when
working
on
dusty jobs.
Donot use
the cable for
purposes
other
than that for which it is
designed.
Do not
carry
the
equipment by
the cable and
do not use the cable to
pull
the
plug
out
of the socket. Protect
the cable from
heat,
oil and
sharp edges.
Secure the
workpiece.
Use
clamps
or a
vise to secure the
workpiece.
This
is
safer than
using your
hand and also
enables
you
to
operate
the machine with
both
hands.
Do not overstretch.
Avoid abnormal
working postures.
Make sure
you
stand
squarely
and
keep your
balance at all
times.
Take
care of
your
tools.
Keep your
tools
sharp
and
clean in order to work well
and
safely.
Follow the maintenance information
and the
instructions for
chang-
ing
tools. Check
the
power plug
and cable
on a
regular
basis and have them
replaced by
an authorized
specialist
if
they
are
damaged.
Check theextension
cable
regularly
and
replace
it if
damaged.
Keep
handles
dry
and free from oil
and
grease.
Pull out
the
power
plug.
When
tools are not in
use,
before
starting
any
mainte-
nance
work or when
changing
attachments such
as saw blades,
drill
bits and all
kinds of mounted tools.
Always
remove
keys
and
wrenches
after use.
Always
check that
keys,
wrenches and other
adjusting
tools
have been removed before
you
switch
on
the
equipment.
Avoid unintentional
starting.
Never
carry
a tool with
your
finger
on the switch
button
while the tool is connected
to the
power
supply.
Make sure that the switch
is turned
off when
connecting
the
tool to the
power
supply.
When using
an
extension cable
outdoors.
Check that it is
approved
for out-
door
duty
and is marked
accordingly.
Bealert at all times.
Watch what
you
are
doing.
Use common sense
when
working.
Never use the
tool when
you
are distracted.
Check
your
tool for
damage.
Before
using
the tool
again,
check the
safety
de-
vices or
any slightly
damaged parts
to ensure
that
they
are in
good
working
or-
der. Check that the
moving parts
are
working correctly,
that
they
do not
jam,
and
that no
parts
are
damaged.
Make sure
that all
parts
are fitted
correctly
to ensure
that the
equipment
remains
safe to use.
Unless otherwise stated in the
oper-
ating
instructions,
damaged
guards
and
parts
have to be
repaired
or
replaced
by
a customer
service
workshop. Damaged
switches have to
be
replaced by
a
14 AFTER SALES SUPPORT
&
service.uk@scheppach.com
ry 00800 4003
4003
MODEL:
SD1600V PRODUCT CODE:
85590 10/2018

Workzone SD1600V Specifications

General

Brand	Workzone
Model	SD1600V
Category	Saw
Language	English