17
17
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
AG36 • 8290• 06/2019
7. Assembly
7.1 Attaching / removing auxiliary handle (7) (see fig. A1-A3)
NOTE: The grinder must only be operated with the auxiliary handle
(7) mounted.
You have the option of three auxiliary handle positions (2) to
provide the safest and most comfortable control of your angle
grinder depending on how you work. The handle (7) can be screwed
clockwise into anyone of the auxiliary handle positions (2) on the
top, left or right sides of the machine head.
7.2 Fitting the grinding disc (9) (see fig. B1-B6 )
WARNING: Always ensure that the grinder is switched
off and the battery pack (6) is removed before making
any adjustments.
1) Take out the pin wrench (8) from the auxiliary handle (7).
NOTE: Please pay attention to the inserting direction of the
pin wrench (8) while storing it in the auxiliary handle (7).
The raised pins on the side of the pin wrench (8) only allow
the pin wrench to be inserted one way inside the auxiliary
handle (7). If the pin wrench doesn’t fit when inserting one
way, turn it around and insert the other way.
2) Remove the outer flange by rotating it in an anti-clockwise
A1 A2 A3
To Next Page
Loading...