20
20
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
AG36 • 8290 • 06/2019
6) Re-tighten the 3 screws. Replace the inner flange (12), grinding
disc (9) and outer flange (11) per previous instructions.
7) Press in the spindle lock button (1) and rotate the outer flange
(11) by hand until it is locked. Keeping the spindle lock button (1)
pressed in, tighten the outer flange (11) with the spanner (8) per
previous instructions.
C1
C4
C7
C2 C3
C6
C5
To Next Page
Loading...
General