Worlde Orca PAD64 - Setup; 4.1 Minimum System Requirements; 4.2 Making detailed settings; Using Orca PAD64 with Software

HANGZHOU WORLDE DIGITAL PIANO CO.,LTD HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
WEBSITE: WWW.WORLDE.COM.CN EMAIL:SALES@WORLDE.COM.CN TEL:86 571 88730848
- 17 -
4. Setup
4.1 Minimum System Requirements
Windows Mac OS
Pentium 3 800 MHz or higher Macintosh G3*800/G4*733 MHz or higher
(CPU requirement may be higher for laptops) (CPU requirement may be higher for laptops)
256MB RAM OS X 10.3.9 with 256 MB RAM,
Direct X 9.0b or higher OS X 10.4.2 or greater with 512 MB RAM
Windows XP(SP2)or higher *G3/G4 accelerator cards are not supported
(Windows 98,Me,NT or 2000 not supported)
4.2 Making detailed settings
The following settings cannot be edited on the Orca PD48 instrument, so you need to use the Worlde Orca PAD64
control Editor. You can download the Worlde Orca PAD64 control Editor from Worlde website www.worlde.com.cn.
5. Using Orca PAD64 with Software
5.1 Creating MIDI Presets with the Orca PAD64 Software Editor
5.1.1 Overview: What is a Orca PAD64 Preset?
Thanks to the Orca PAD64 Software Editor it’s possible to configure the Orca PAD64 to work with practically any device or
software capable of responding to MIDI information.
To summarize, here are some examples of what you can do with a Orca PAD64 preset: