Worlde P-49 PRO - Section 1: Getting Started; P-49;61;88 PRO Keyboards Overview; Top Panel Overview; Rear Panel Overview

Section
1.1
1.1.1
1.1.2
1.1.3 Control Definitions
The controls are referred by name throughout this manual.
1：
LCD DISPLAY
2：
Slider
3：
Encoders
4：
Transport butto
5：
Function buttons
6：
Trigger Pads(with RGB backlit, refer to 3.5.4 for more info)
7：
Modulation
8：
Pitch Bend
9：
Keyboard with Aftertouch
1.2
If you inten
WORLDE
1.2.1
If you are using your
Windows
i3
(CPU requirement may b
1G
DirectX 9.0b or higher
Windows XP (SP2) or higher
(Windows 98, Me, NT or 20
WORLDE
USB hubs are not supported.
Section
P-
49/61/88
1.1.1
Top Panel Overview
1.1.2
Rear Panel Overview
1.1.3 Control Definitions
The controls are referred by name throughout this manual.
LCD DISPLAY
Slider
Encoders
Transport butto
Function buttons
Trigger Pads(with RGB backlit, refer to 3.5.4 for more info)
Modulation
Pitch Bend
Keyboard with Aftertouch
Setup
If you inten
WORLDE
1.2.1
Minimum System Requirements
If you are using your
Windows
i3 1.2GHz
(CPU requirement may b
1G
RAM
DirectX 9.0b or higher
Windows XP (SP2) or higher
(Windows 98, Me, NT or 20
WORLDE
USB hubs are not supported.
HANGZHOU
WEBSITE:WWW.WORLDE.COM.CN
Section
1: Getting
49/61/88
Top Panel Overview
Rear Panel Overview
1.1.3 Control Definitions
The controls are referred by name throughout this manual.
LCD DISPLAY
Slider
s
Encoders
Transport butto
Function buttons
Trigger Pads(with RGB backlit, refer to 3.5.4 for more info)
Modulation
Pitch Bend
Keyboard with Aftertouch
Setup
If you intend to connect your
WORLDE
P
Minimum System Requirements
If you are using your
Windows
1.2GHz
(CPU requirement may b
RAM
DirectX 9.0b or higher
Windows XP (SP2) or higher
(Windows 98, Me, NT or 20
WORLDE
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
USB hubs are not supported.
HANGZHOU
WEBSITE:WWW.WORLDE.COM.CN
1: Getting
49/61/88
Top Panel Overview
Rear Panel Overview
1.1.3 Control Definitions
The controls are referred by name throughout this manual.
LCD DISPLAY
Encoders
Transport butto
Function buttons
Trigger Pads(with RGB backlit, refer to 3.5.4 for more info)
Modulation
Pitch Bend
Keyboard with Aftertouch
d to connect your
P
-
49/61/88 PRO
Minimum System Requirements
If you are using your
or higher
(CPU requirement may b
DirectX 9.0b or higher
Windows XP (SP2) or higher
(Windows 98, Me, NT or 20
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
USB hubs are not supported.
HANGZHOU BLUE WHALE MUSIC TECHNOLOGY
WEBSITE:WWW.WORLDE.COM.CN
1: Getting
49/61/88
PRO
Top Panel Overview
Rear Panel Overview
1.1.3 Control Definitions
The controls are referred by name throughout this manual.
LCD DISPLAY
Encoders
Transport butto
Function buttons
Trigger Pads(with RGB backlit, refer to 3.5.4 for more info)
Modulation
to
u
Pitch Bend
tou
c
Keyboard with Aftertouch
d to connect your
49/61/88 PRO
Minimum System Requirements
If you are using your
or higher
(CPU requirement may b
DirectX 9.0b or higher
Windows XP (SP2) or higher
(Windows 98, Me, NT or 20
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
USB hubs are not supported.
BLUE WHALE MUSIC TECHNOLOGY
WEBSITE:WWW.WORLDE.COM.CN
1: Getting
PRO
Keyboards Overview
Top Panel Overview
Rear Panel Overview
1.1.3 Control Definitions
The controls are referred by name throughout this manual.
LCD DISPLAY
Transport butto
ns
Function buttons
Trigger Pads(with RGB backlit, refer to 3.5.4 for more info)
u
ch
s
c
h
s
Keyboard with Aftertouch
d to connect your
49/61/88 PRO
Minimum System Requirements
If you are using your WORLDE
or higher
(CPU requirement may b
DirectX 9.0b or higher
Windows XP (SP2) or higher
(Windows 98, Me, NT or 20
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
USB hubs are not supported.
BLUE WHALE MUSIC TECHNOLOGY
WEBSITE:WWW.WORLDE.COM.CN
1: Getting
started
Keyboards Overview
Top Panel Overview
Rear Panel Overview
1.1.3 Control Definitions
The controls are referred by name throughout this manual.
Function buttons
Trigger Pads(with RGB backlit, refer to 3.5.4 for more info)
s
tri
p
s
tri
p
Keyboard with Aftertouch
d to connect your
49/61/88 PRO
Minimum System Requirements
WORLDE
(CPU requirement may be higher for laptops)
Windows XP (SP2) or higher
(Windows 98, Me, NT or 20
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
USB hubs are not supported.
BLUE WHALE MUSIC TECHNOLOGY
WEBSITE:WWW.WORLDE.COM.CN
started
Keyboards Overview
Rear Panel Overview
The controls are referred by name throughout this manual.
Trigger Pads(with RGB backlit, refer to 3.5.4 for more info)
p
s
s
Keyboard with Aftertouch
d to connect your WORLDE
49/61/88 PRO keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
Minimum System Requirements
WORLDE
e higher for laptops)
Windows XP (SP2) or higher
(Windows 98, Me, NT or 2000 not supported)
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
USB hubs are not supported. WORLDE
BLUE WHALE MUSIC TECHNOLOGY
WEBSITE:WWW.WORLDE.COM.CN
started
Keyboards Overview
The controls are referred by name throughout this manual.
Trigger Pads(with RGB backlit, refer to 3.5.4 for more info)
Keyboard with Aftertouch
WORLDE
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
Minimum System Requirements
P-
49/61/88 PRO
e higher for laptops)
00 not supported)
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
WORLDE
BLUE WHALE MUSIC TECHNOLOGY
WEBSITE:WWW.WORLDE.COM.CN
Keyboards Overview
The controls are referred by name throughout this manual.
Trigger Pads(with RGB backlit, refer to 3.5.4 for more info)
Keyboard with Aftertouch
WORLDE
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
Minimum System Requirements
49/61/88 PRO
e higher for laptops)
00 not supported)
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
WORLDE
BLUE WHALE MUSIC TECHNOLOGY
Keyboards Overview
The controls are referred by name throughout this manual.
Trigger Pads(with RGB backlit, refer to 3.5.4 for more info)
Keyboard with Aftertouch
P-
49/61/88 PRO
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
Minimum System Requirements
49/61/88 PRO
e higher for laptops)
00 not supported)
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
WORLDE
suggests that you connect directly to one of your computer’s built in USB ports.
BLUE WHALE MUSIC TECHNOLOGY
Keyboards Overview
The controls are referred by name throughout this manual.
Trigger Pads(with RGB backlit, refer to 3.5.4 for more info)
Keyboard with Aftertouch
49/61/88 PRO
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
49/61/88 PRO
e higher for laptops)
00 not supported)
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
suggests that you connect directly to one of your computer’s built in USB ports.
BLUE WHALE MUSIC TECHNOLOGY CO.,LTD
Keyboards Overview
The controls are referred by name throughout this manual.
Trigger Pads(with RGB backlit, refer to 3.5.4 for more info)
49/61/88 PRO
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
49/61/88 PRO
with a computer, the following minimum system requirements apply:
Mac OS
Macintosh i3*1.2GHz/P4*1.2GHz
(CPU requirement may be higher for laptops)
OS X 10.3.9 with
OS X 10.4.2 or greater with
*G3/G4 accelerator cards are not supported.
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
suggests that you connect directly to one of your computer’s built in USB ports.
CO.,LTD
The controls are referred by name throughout this manual.
Trigger Pads(with RGB backlit, refer to 3.5.4 for more info)
49/61/88 PRO
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
with a computer, the following minimum system requirements apply:
Mac OS
Macintosh i3*1.2GHz/P4*1.2GHz
(CPU requirement may be higher for laptops)
OS X 10.3.9 with
OS X 10.4.2 or greater with
*G3/G4 accelerator cards are not supported.
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
suggests that you connect directly to one of your computer’s built in USB ports.
CO.,LTD
The controls are referred by name throughout this manual.
Trigger Pads(with RGB backlit, refer to 3.5.4 for more info)
49/61/88 PRO
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
with a computer, the following minimum system requirements apply:
Mac OS
Macintosh i3*1.2GHz/P4*1.2GHz
(CPU requirement may be higher for laptops)
OS X 10.3.9 with
OS X 10.4.2 or greater with
*G3/G4 accelerator cards are not supported.
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
suggests that you connect directly to one of your computer’s built in USB ports.
The controls are referred by name throughout this manual.
Trigger Pads(with RGB backlit, refer to 3.5.4 for more info)
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
with a computer, the following minimum system requirements apply:
Macintosh i3*1.2GHz/P4*1.2GHz
(CPU requirement may be higher for laptops)
OS X 10.3.9 with
OS X 10.4.2 or greater with
*G3/G4 accelerator cards are not supported.
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
suggests that you connect directly to one of your computer’s built in USB ports.
EMAIL:SALES@WORLDE.COM.CN
Trigger Pads(with RGB backlit, refer to 3.5.4 for more info)
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
with a computer, the following minimum system requirements apply:
Macintosh i3*1.2GHz/P4*1.2GHz
(CPU requirement may be higher for laptops)
OS X 10.3.9 with
OS X 10.4.2 or greater with
*G3/G4 accelerator cards are not supported.
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
suggests that you connect directly to one of your computer’s built in USB ports.
EMAIL:SALES@WORLDE.COM.CN
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
with a computer, the following minimum system requirements apply:
Macintosh i3*1.2GHz/P4*1.2GHz
(CPU requirement may be higher for laptops)
OS X 10.3.9 with
1G
RAM,
OS X 10.4.2 or greater with
*G3/G4 accelerator cards are not supported.
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
suggests that you connect directly to one of your computer’s built in USB ports.
EMAIL:SALES@WORLDE.COM.CN
-
4
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
with a computer, the following minimum system requirements apply:
Macintosh i3*1.2GHz/P4*1.2GHz
(CPU requirement may be higher for laptops)
RAM,
OS X 10.4.2 or greater with
*G3/G4 accelerator cards are not supported.
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
suggests that you connect directly to one of your computer’s built in USB ports.
EMAIL:SALES@WORLDE.COM.CN
4
-
10
11
12
polarity of Pedal A when
13
to select the polarity of Pedal B when
14
15
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
with a computer, the following minimum system requirements apply:
Macintosh i3*1.2GHz/P4*1.2GHz
(CPU requirement may be higher for laptops)
RAM,
OS X 10.4.2 or greater with 1G
*G3/G4 accelerator cards are not supported.
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
suggests that you connect directly to one of your computer’s built in USB ports.
EMAIL:SALES@WORLDE.COM.CN
10：
11：
12：
polarity of Pedal A when
13：
to select the polarity of Pedal B when
14：
15：
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
with a computer, the following minimum system requirements apply:
Macintosh i3*1.2GHz/P4*1.2GHz
(CPU requirement may be higher for laptops)
1G
RAM
*G3/G4 accelerator cards are not supported.
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
suggests that you connect directly to one of your computer’s built in USB ports.
EMAIL:SALES@WORLDE.COM.CN
：MIDI IN port
：MIDI OUT port
：Pedal A ( sustain pedal, press ‘Ctrl Assign’ bu
polarity of Pedal A when
：Pedal B( default as expression pedal , press ‘Ctrl Assign’ button
to select the polarity of Pedal B when
：USB 2.0 port
：DC power socket
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
with a computer, the following minimum system requirements apply:
or higher
(CPU requirement may be higher for laptops)
RAM
*G3/G4 accelerator cards are not supported.
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
suggests that you connect directly to one of your computer’s built in USB ports.
EMAIL:SALES@WORLDE.COM.CN
MIDI IN port
MIDI OUT port
Pedal A ( sustain pedal, press ‘Ctrl Assign’ bu
polarity of Pedal A when
Pedal B( default as expression pedal , press ‘Ctrl Assign’ button
to select the polarity of Pedal B when
USB 2.0 port
DC power socket
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
with a computer, the following minimum system requirements apply:
or higher
(CPU requirement may be higher for laptops)
*G3/G4 accelerator cards are not supported.
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
suggests that you connect directly to one of your computer’s built in USB ports.
HANGZHOU WORLDE MUSIC ELECTRONIC CO.
EMAIL:SALES@WORLDE.COM.CN
MIDI IN port
MIDI OUT port
Pedal A ( sustain pedal, press ‘Ctrl Assign’ bu
polarity of Pedal A when
Pedal B( default as expression pedal , press ‘Ctrl Assign’ button
to select the polarity of Pedal B when
USB 2.0 port
DC power socket
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
with a computer, the following minimum system requirements apply:
or higher
(CPU requirement may be higher for laptops)
*G3/G4 accelerator cards are not supported.
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
suggests that you connect directly to one of your computer’s built in USB ports.
HANGZHOU WORLDE MUSIC ELECTRONIC CO.
MIDI IN port
MIDI OUT port
Pedal A ( sustain pedal, press ‘Ctrl Assign’ bu
polarity of Pedal A when
Pedal B( default as expression pedal , press ‘Ctrl Assign’ button
to select the polarity of Pedal B when
USB 2.0 port
DC power socket
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
with a computer, the following minimum system requirements apply:
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
suggests that you connect directly to one of your computer’s built in USB ports.
HANGZHOU WORLDE MUSIC ELECTRONIC CO.
MIDI OUT port
Pedal A ( sustain pedal, press ‘Ctrl Assign’ bu
polarity of Pedal A when
Pedal B( default as expression pedal , press ‘Ctrl Assign’ button
to select the polarity of Pedal B when
USB 2.0 port
DC power socket
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
with a computer, the following minimum system requirements apply:
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
suggests that you connect directly to one of your computer’s built in USB ports.
HANGZHOU WORLDE MUSIC ELECTRONIC CO.
Pedal A ( sustain pedal, press ‘Ctrl Assign’ bu
polarity of Pedal A when s
Pedal B( default as expression pedal , press ‘Ctrl Assign’ button
to select the polarity of Pedal B when
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
with a computer, the following minimum system requirements apply:
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
suggests that you connect directly to one of your computer’s built in USB ports.
HANGZHOU WORLDE MUSIC ELECTRONIC CO.
Pedal A ( sustain pedal, press ‘Ctrl Assign’ bu
s
w
itch on the unit)
Pedal B( default as expression pedal , press ‘Ctrl Assign’ button
to select the polarity of Pedal B when
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
with a computer, the following minimum system requirements apply:
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
suggests that you connect directly to one of your computer’s built in USB ports.
HANGZHOU WORLDE MUSIC ELECTRONIC CO.
Pedal A ( sustain pedal, press ‘Ctrl Assign’ bu
itch on the unit)
Pedal B( default as expression pedal , press ‘Ctrl Assign’ button
to select the polarity of Pedal B when
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
with a computer, the following minimum system requirements apply:
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
suggests that you connect directly to one of your computer’s built in USB ports.
HANGZHOU WORLDE MUSIC ELECTRONIC CO.
Pedal A ( sustain pedal, press ‘Ctrl Assign’ bu
itch on the unit)
Pedal B( default as expression pedal , press ‘Ctrl Assign’ button
to select the polarity of Pedal B when
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
with a computer, the following minimum system requirements apply:
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
suggests that you connect directly to one of your computer’s built in USB ports.
HANGZHOU WORLDE MUSIC ELECTRONIC CO.
TEL:86 571 88730848
Pedal A ( sustain pedal, press ‘Ctrl Assign’ bu
itch on the unit)
Pedal B( default as expression pedal , press ‘Ctrl Assign’ button
to select the polarity of Pedal B when
s
w
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
suggests that you connect directly to one of your computer’s built in USB ports.
HANGZHOU WORLDE MUSIC ELECTRONIC CO.
TEL:86 571 88730848
Pedal A ( sustain pedal, press ‘Ctrl Assign’ bu
itch on the unit)
Pedal B( default as expression pedal , press ‘Ctrl Assign’ button
witch on the unit)
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to se
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
HANGZHOU WORLDE MUSIC ELECTRONIC CO.
TEL:86 571 88730848
Pedal A ( sustain pedal, press ‘Ctrl Assign’ bu
itch on the unit)
Pedal B( default as expression pedal , press ‘Ctrl Assign’ button
itch on the unit)
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
keyboard to control a sound module or synthesizer using the external MIDI OUT you should skip to section 1.4.
suggests you also check the minimum system requirements for your software, as they may be greater than the above.
HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
TEL:86 571 88730848
Pedal A ( sustain pedal, press ‘Ctrl Assign’ button to select the
Pedal B( default as expression pedal , press ‘Ctrl Assign’ button
itch on the unit)
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
ction 1.4.
, LTD
TEL:86 571 88730848
tton to select the
Pedal B( default as expression pedal , press ‘Ctrl Assign’ button
itch on the unit)
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
ction 1.4.
tton to select the
Pedal B( default as expression pedal , press ‘Ctrl Assign’ button
itch on the unit)
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
ction 1.4.
tton to select the
Pedal B( default as expression pedal , press ‘Ctrl Assign’ button
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
tton to select the
Pedal B( default as expression pedal , press ‘Ctrl Assign’ button
keyboard to a computer, please read sections 1.2 and 1.3 first. If you only intend to use your
tton to select the
Pedal B( default as expression pedal , press ‘Ctrl Assign’ button