2.4.2
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
bank number. The voice c
displays the following:
(1
)Press the “Bank L/M” button for one
(2
(3
)Press the “Enter” button to confirm and the LCD will display “Done”.
2.5
There are 135 MIDI controller messa
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
pan,
Each of the controls on your
Please note that in order for these effects to wo
messages is given in Appendix C.
For example,
popular effects
There are many different types of v
parameters from your
numbers are.
2.5.1
When programming a physical controller on your
select a different physical c
button.
you exit Assign mode)
BANK L/M
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
bank number. The voice c
displays the following:
)Press the “Bank L/M” button for one
)Press “+” or “
)Press the “Enter” button to confirm and the LCD will display “Done”.
2.5 MIDI Controller Messages
There are 135 MIDI controller messa
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
pan,
expression, reverb, chorus and
Each of the controls on your
Please note that in order for these effects to wo
messages is given in Appendix C.
For example,
popular effects
There are many different types of v
parameters from your
numbers are.
2.5.1 Programming the Controls on Your
When programming a physical controller on your
select a different physical c
button.
User the “+” or “
you exit Assign mode)
HANGZHOU
WEBSITE:WWW.WORLDE.COM.CN
BANK L/M
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
bank number. The voice c
displays the following:
)Press the “Bank L/M” button for one
)Press “+” or “
)Press the “Enter” button to confirm and the LCD will display “Done”.
MIDI Controller Messages
There are 135 MIDI controller messa
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
expression, reverb, chorus and
Each of the controls on your
Please note that in order for these effects to wo
messages is given in Appendix C.
For example,
popular effects
There are many different types of v
parameters from your
numbers are.
Programming the Controls on Your
When programming a physical controller on your
select a different physical c
User the “+” or “
you exit Assign mode)
HANGZHOU
WEBSITE:WWW.WORLDE.COM.CN
BANK L/M
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
bank number. The voice c
displays the following:
)Press the “Bank L/M” button for one
)Press “+” or “
)Press the “Enter” button to confirm and the LCD will display “Done”.
MIDI Controller Messages
There are 135 MIDI controller messa
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
expression, reverb, chorus and
Each of the controls on your
Please note that in order for these effects to wo
messages is given in Appendix C.
For example,
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
popular effects are listed in the table below.
There are many different types of v
parameters from your
numbers are.
Programming the Controls on Your
When programming a physical controller on your
select a different physical c
User the “+” or “
you exit Assign mode)
HANGZHOU BLUE WHALE MUSIC TECHNOLOGY
WEBSITE:WWW.WORLDE.COM.CN
BANK L/M
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
bank number. The voice c
displays the following:
)Press the “Bank L/M” button for one
)Press “+” or “
-
” button to
)Press the “Enter” button to confirm and the LCD will display “Done”.
MIDI Controller Messages
There are 135 MIDI controller messa
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
expression, reverb, chorus and
Each of the controls on your
Please note that in order for these effects to wo
messages is given in Appendix C.
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
are listed in the table below.
There are many different types of v
parameters from your
Programming the Controls on Your
When programming a physical controller on your
select a different physical c
User the “+” or “
you exit Assign mode)
BLUE WHALE MUSIC TECHNOLOGY
WEBSITE:WWW.WORLDE.COM.CN
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
bank number. The voice c
displays the following:
)Press the “Bank L/M” button for one
” button to
)Press the “Enter” button to confirm and the LCD will display “Done”.
MIDI Controller Messages
There are 135 MIDI controller messa
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
expression, reverb, chorus and
Each of the controls on your
Please note that in order for these effects to wo
messages is given in Appendix C.
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
are listed in the table below.
There are many different types of v
parameters from your P
Programming the Controls on Your
When programming a physical controller on your
select a different physical c
User the “+” or “-
you exit Assign mode).When in assign, the LCD displays the following:
BLUE WHALE MUSIC TECHNOLOGY
WEBSITE:WWW.WORLDE.COM.CN
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
bank number. The voice can be adjusted or selected with +/
)Press the “Bank L/M” button for one
” button to
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M va
)Press the “Enter” button to confirm and the LCD will display “Done”.
MIDI Controller Messages
There are 135 MIDI controller messa
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
expression, reverb, chorus and
Each of the controls on your
Please note that in order for these effects to wo
messages is given in Appendix C.
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
are listed in the table below.
There are many different types of v
P
-
49/61/88
Programming the Controls on Your
When programming a physical controller on your
select a different physical controller for programming, the method is: Move the physical controller you wish to program, and press the assignable
-” button to input the value
.When in assign, the LCD displays the following:
BLUE WHALE MUSIC TECHNOLOGY
WEBSITE:WWW.WORLDE.COM.CN
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
an be adjusted or selected with +/
)Press the “Bank L/M” button for one
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M va
)Press the “Enter” button to confirm and the LCD will display “Done”.
MIDI Controller Messages
There are 135 MIDI controller messa
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
expression, reverb, chorus and
Each of the controls on your
P-
49/61/88
Please note that in order for these effects to wo
messages is given in Appendix C.
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
are listed in the table below.
There are many different types of v
49/61/88
Programming the Controls on Your
When programming a physical controller on your
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
” button to input the value
.When in assign, the LCD displays the following:
BLUE WHALE MUSIC TECHNOLOGY
WEBSITE:WWW.WORLDE.COM.CN
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
an be adjusted or selected with +/
)Press the “Bank L/M” button for one
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M va
)Press the “Enter” button to confirm and the LCD will display “Done”.
MIDI Controller Messages
There are 135 MIDI controller messa
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
expression, reverb, chorus and
49/61/88
Please note that in order for these effects to wo
messages is given in Appendix C.
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
are listed in the table below.
There are many different types of virtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
49/61/88
PRO
Programming the Controls on Your
When programming a physical controller on your
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
” button to input the value
.When in assign, the LCD displays the following:
BLUE WHALE MUSIC TECHNOLOGY
WEBSITE:WWW.WORLDE.COM.CN
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
an be adjusted or selected with +/
)Press the “Bank L/M” button for one time
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M va
)Press the “Enter” button to confirm and the LCD will display “Done”.
There are 135 MIDI controller messages that are used for controlling the MIDI
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
expression, reverb, chorus and
portamento.
49/61/88
Please note that in order for these effects to wo
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
are listed in the table below.
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
PRO
keyboard.
Programming the Controls on Your
When programming a physical controller on your
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
” button to input the value
.When in assign, the LCD displays the following:
BLUE WHALE MUSIC TECHNOLOGY
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
an be adjusted or selected with +/
time
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M va
)Press the “Enter” button to confirm and the LCD will display “Done”.
ges that are used for controlling the MIDI
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
portamento.
49/61/88
PRO
Please note that in order for these effects to wo
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
are listed in the table below.
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
keyboard.
Programming the Controls on Your
When programming a physical controller on your
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
” button to input the value
.When in assign, the LCD displays the following:
BLUE WHALE MUSIC TECHNOLOGY
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
an be adjusted or selected with +/
and
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M va
)Press the “Enter” button to confirm and the LCD will display “Done”.
ges that are used for controlling the MIDI
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
portamento.
PRO
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
Please note that in order for these effects to work, the MIDI device you are sending to must be able to receive these messages. A full list of these control
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
are listed in the table below. (Please consult Appendix C for the full list.)
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
keyboard.
P-
49/61/88
When programming a physical controller on your
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
” button to input the value
.When in assign, the LCD displays the following:
BLUE WHALE MUSIC TECHNOLOGY CO.,LTD
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
an be adjusted or selected with +/
and
the LCD displays “Bank L/M”.
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M va
)Press the “Enter” button to confirm and the LCD will display “Done”.
ges that are used for controlling the MIDI
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
portamento.
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
(Please consult Appendix C for the full list.)
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
keyboard. Please review the manual that came with your software or external gear to see what these
49/61/88
When programming a physical controller on your
P
-
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
” button to input the value
for the
.When in assign, the LCD displays the following:
CO.,LTD
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
an be adjusted or selected with +/
the LCD displays “Bank L/M”.
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M va
)Press the “Enter” button to confirm and the LCD will display “Done”.
ges that are used for controlling the MIDI
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
(Please consult Appendix C for the full list.)
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these
49/61/88
-49/61/88
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
for the
.When in assign, the LCD displays the following:
CO.,LTD
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
an be adjusted or selected with +/
the LCD displays “Bank L/M”.
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M va
)Press the “Enter” button to confirm and the LCD will display “Done”.
ges that are used for controlling the MIDI
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
(Please consult Appendix C for the full list.)
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these
PRO
49/61/88
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
for the selected
.When in assign, the LCD displays the following:
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
an be adjusted or selected with +/
-
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
the LCD displays “Bank L/M”.
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M va
)Press the “Enter” button to confirm and the LCD will display “Done”.
ges that are used for controlling the MIDI
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
(Please consult Appendix C for the full list.)
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these
PRO
PRO
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
selected
.When in assign, the LCD displays the following:
EMAIL:SALES@WORLDE.COM.CN
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
the LCD displays “Bank L/M”.
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M va
)Press the “Enter” button to confirm and the LCD will display “Done”.
ges that are used for controlling the MIDI
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
(Please consult Appendix C for the full list.)
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these
PRO, the controller that was last used will be the first one selected for programming. To
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
selected controller
.When in assign, the LCD displays the following:
EMAIL:SALES@WORLDE.COM.CN
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
the LCD displays “Bank L/M”.
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M va
)Press the “Enter” button to confirm and the LCD will display “Done”.
ges that are used for controlling the MIDI
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
(Please consult Appendix C for the full list.)
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these
, the controller that was last used will be the first one selected for programming. To
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
controller
.When in assign, the LCD displays the following:
EMAIL:SALES@WORLDE.COM.CN
-
8
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
the LCD displays “Bank L/M”.
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M va
ges that are used for controlling the MIDI
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
(Please consult Appendix C for the full list.)
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these
, the controller that was last used will be the first one selected for programming. To
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
controller.
EMAIL:SALES@WORLDE.COM.CN
8
-
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
the LCD displays “Bank L/M”.
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M va
ges that are used for controlling the MIDI
-
adjustable parameters in your software or on your external MIDI gear(0 to
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
(Please consult Appendix C for the full list.)
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these
, the controller that was last used will be the first one selected for programming. To
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
. The numbers are the controllers
EMAIL:SALES@WORLDE.COM.CN
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M va
adjustable parameters in your software or on your external MIDI gear(0 to
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
(Please consult Appendix C for the full list.)
1
7
10
11
91
93
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these
, the controller that was last used will be the first one selected for programming. To
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
The numbers are the controllers
EMAIL:SALES@WORLDE.COM.CN
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M va
adjustable parameters in your software or on your external MIDI gear(0 to
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
(Please consult Appendix C for the full list.)
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these
, the controller that was last used will be the first one selected for programming. To
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
The numbers are the controllers
EMAIL:SALES@WORLDE.COM.CN
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M va
adjustable parameters in your software or on your external MIDI gear(0 to
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
(Please consult Appendix C for the full list.)
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these
, the controller that was last used will be the first one selected for programming. To
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
The numbers are the controllers
HANGZHOU WORLDE MUSIC ELECTRONIC CO.
EMAIL:SALES@WORLDE.COM.CN
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M va
adjustable parameters in your software or on your external MIDI gear(0 to
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these
, the controller that was last used will be the first one selected for programming. To
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
The numbers are the controllers
HANGZHOU WORLDE MUSIC ELECTRONIC CO.
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M va
adjustable parameters in your software or on your external MIDI gear(0 to
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these
, the controller that was last used will be the first one selected for programming. To
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
The numbers are the controllers
HANGZHOU WORLDE MUSIC ELECTRONIC CO.
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M va
adjustable parameters in your software or on your external MIDI gear(0 to
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these
, the controller that was last used will be the first one selected for programming. To
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
The numbers are the controllers
HANGZHOU WORLDE MUSIC ELECTRONIC CO.
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M va
adjustable parameters in your software or on your external MIDI gear(0 to
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these
, the controller that was last used will be the first one selected for programming. To
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
The numbers are the controllers
HANGZHOU WORLDE MUSIC ELECTRONIC CO.
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M va
adjustable parameters in your software or on your external MIDI gear(0 to
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these
, the controller that was last used will be the first one selected for programming. To
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
The numbers are the controllers
HANGZHOU WORLDE MUSIC ELECTRONIC CO.
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
adjust the keyboard Bank L/M, the LCD will display the current keyboard bank L/M value on the bottom
adjustable parameters in your software or on your external MIDI gear(0 to
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these
, the controller that was last used will be the first one selected for programming. To
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
(The controller value w
HANGZHOU WORLDE MUSIC ELECTRONIC CO.
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
lue on the bottom
adjustable parameters in your software or on your external MIDI gear(0 to
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
you may want to set the Knob1 to control the channel volume. This is done by assigning controller 7 to
the Knob1
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these
, the controller that was last used will be the first one selected for programming. To
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
he controller value w
HANGZHOU WORLDE MUSIC ELECTRONIC CO.
TEL:86 571 88730848
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
lue on the bottom
adjustable parameters in your software or on your external MIDI gear(0 to
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
the Knob1
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these
, the controller that was last used will be the first one selected for programming. To
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
he controller value w
HANGZHOU WORLDE MUSIC ELECTRONIC CO.
TEL:86 571 88730848
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
lue on the bottom
adjustable parameters in your software or on your external MIDI gear(0 to
127 is the standard MIDI control parameter,128 to 134 is the special MIDI control parameter). Examples of these controllable parameters inc
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
the Knob1
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these
, the controller that was last used will be the first one selected for programming. To
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
he controller value w
HANGZHOU WORLDE MUSIC ELECTRONIC CO.
TEL:86 571 88730848
Press Bank L/M button to adjust the voice bank of current channel. When these buttons are valid, the LCD displays the ‘BANK L/M’ and the current voice
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
lue on the bottom-
adjustable parameters in your software or on your external MIDI gear(0 to
parameters inc
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
the Knob1
.
Examples of other
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these
, the controller that was last used will be the first one selected for programming. To
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
he controller value w
HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
TEL:86 571 88730848
/M’ and the current voice
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
-
left corner.
adjustable parameters in your software or on your external MIDI gear(0 to
parameters inc
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
Examples of other
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these
, the controller that was last used will be the first one selected for programming. To
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
he controller value will be displayed when
, LTD
TEL:86 571 88730848
/M’ and the current voice
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
left corner.
adjustable parameters in your software or on your external MIDI gear(0 to
parameters inc
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
Examples of other
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these
, the controller that was last used will be the first one selected for programming. To
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
ill be displayed when
/M’ and the current voice
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
left corner.
adjustable parameters in your software or on your external MIDI gear(0 to
parameters include volume,
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
Examples of other
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
Please review the manual that came with your software or external gear to see what these controller
, the controller that was last used will be the first one selected for programming. To
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
ill be displayed when
/M’ and the current voice
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
adjustable parameters in your software or on your external MIDI gear(0 to
lude volume,
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
Examples of other
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
controller
, the controller that was last used will be the first one selected for programming. To
ontroller for programming, the method is: Move the physical controller you wish to program, and press the assignable
ill be displayed when
/M’ and the current voice
Button. The initial setting is 00, adjusting scale is 0~127. The operation steps and LCD
adjustable parameters in your software or on your external MIDI gear(0 to
lude volume,
keyboard is able to send any of the 128 standard MIDI controller messages to control such parameters.
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
Examples of other
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
controller
, the controller that was last used will be the first one selected for programming. To
ill be displayed when
/M’ and the current voice
adjustable parameters in your software or on your external MIDI gear(0 to
lude volume,
rk, the MIDI device you are sending to must be able to receive these messages. A full list of these control
irtual instruments available and most of these respond to MIDI controller messages, allowing you to control a variety of
controller
ill be displayed when
To Next Page
Loading...
