BWS platform scales Technical Manual
PRECAUTIONS
WARNING
DISCONNECT ALL POWER TO THIS UNIT
BEFORE INSTALLING, CLEANING, OR
SERVICING. FAILURE TO DO SO COULD
RESULT IN BODILY HARM OR DAMAGE THE
UNIT.
CAUTION
• Permit only qualified persons to service the instrument
• Before connecting or disconnecting any components, remove the
power.
•
Failure to observe these precautions bodily harm or damage to or
destruction of the equipment.
• The platform scales is a precision electronic instrument,
handle it carefully.
• Do not install the scale in direct sunlight.
• Verify the local voltage and receptacle type are correct for
the scale.
• Only use original adaptor, other could cause damage to the
scale.
• Pluggable equipment must be installed near an easily
accessible socket outlet.
• Avoid unstable power sources. Do not use near large users
of electricity such as welding equipment or large motors.
• Avoid sudden temperature changes, vibration, wind and
water.
• Avoid heavy RF noise.
• Keep the indicator clean
To Next Page
Loading...
