Wormald 08451 - Components List

Page | 4
2 Components List
FP-08451
Fire Control Panel
Detection and extinguishant
control system
2x DP-3000
4x DP-2000
2x FP-08950
1x
1x
1x
Deutsch Plug 3 Pin M/F, c/w heatshrink
Deutsch Plug 3 Pin M/F, c/w heatshrink
End-of-line Plug 22kΩ (Detection)
End-of-line Diode 1N4004 (Siren/Strobe)
End-of-Line Resistor 3k3Ω (Discharge)
Operator’s Manual
Agent Release Circuit
Siren / Strobe Circuit
FP-08825
Thermal Fuse Coupling
FP-08940
Siren/Strobe
Discharge Circuit
FirePro Aerosol
Generator
100g – 500g Unit.
Constructed from Stainless Steel.
Comes with installed Deutsch Plug
for easy install
FP-6200
Heavy Duty Bracket 316 SS.
Suits FP-100, 200, 500 FirePro
Aerosol Generators.
FirePro Aerosol
Generator
1200g – 5700g Unit.
Constructed from Stainless Steel.
Comes with installed Deutsch Plug
for easy install.
FP-6100
Heavy Duty Bracket 316 SS.
Suits FP-1200, 2000, 3000 5700
FirePro Aerosol Generators.
Detection Circuit (Circuit 1 Alarm & Circuit 2 Alarm)
FP-08920
Marine Grade Thermal Detector
60°C Fixed. Other temperatures
available on request.
FP-14053
Manual Actuator
Internal OR External
FP-09510
Linear Heat Detection Cable 182° C
FP-09511
Linear Heat Detection Installation kit.
Mounting Clips, 2x Junction Boxes
with strain relief cable glands and 1x
EOL for monitoring.
Installation Components
Service Components
FP-09500
2 Hour Fire Rated Shielded Cable.
FP-08960
Signage for the System. A sheet of
different size labels.
FP-08919
Wiring loom and Splitter Cable for
installaion of multiple FirePro
generators.
FP-08800
FirePro Simulator – for Testing &
Commissioning.
Additional Modules
FP-08850
Discharge Delay Module
Allows additional FirePro generators
to be discharged
FP-08860
Shutdown Relay Module
Provides facility for equipment
shutdown
FP-08870/8871/8872
Power Control Module
Provides back up power for control
panel.