12
EN
When pegging the boundary wire for the first time, it is recommended to use a normal lawn mower or a grass
trimmer to cut the grass along the boundary. Then the wire can be laid as close as possible to the ground to prevent
the Landroid
®
accidentally cutting the wire. The boundary wire is powered with a very low voltage so that it is totally
safe to human beings and pets.
2. Pegging Your Boundary Wire
NOTE: Keep the boundary wire straight and tight between the
pegs, there should be no slack wire between the pegs.
When laying the boundary
wire, use the distance
gauge to keep a 26cm space
between the wire and the
boundary.
Each wire peg should be
placed around 75cm apart.
Use the provided distance
gauge to ensure proper
installation.
NOTE: The maximum
permitted length for the
boundary wire is 350m.
2.1
To Next Page
Loading...
