13
EN
2.3
If there is an island that sits inside your lawn where you don't
want Landroid
®
to go, please follow the path as shown in the
diagram as you peg the wire. The wire should run from the
perimeter to outline the defined island and then return back
to the perimeter. The boundary wire between the island and
perimeter should be closely laid together and held in place by
the same wire peg. During operation, the Landroid
®
will be
able to freely pass over this part of the wire.
2.2
A feature, such as flowers or shrubs that are close to the mowing
boundary, should be excluded from the Landroid
®
mowing area.
To Next Page
Loading...
