EasyManua.ls Logo

Worx Landroid WR141E - 12 Security

Worx Landroid WR141E
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Owner’s Manual EN
23
Landroid
®
is trapped.
1. Turn Landroid
®
off;
2. Take Landroid
®
to an area in your lawn free of obstacles obstacles.
3. Turn Landroid
®
on. Press then .
4. If the error message is still displayed; turn power off; turn Landroid
®
upside-down. Check if there is anything preventing the wheels from
rotating.
5. Remove any obstruction, turn Landroid
®
upright, turn power on. Press
then
.
Landroid
®
is lifted up.
1. Turn Landroid
®
off.
2. Take Landroid
®
to a lawn area clear of obstacles, turn Landroid
®
on. Press
then .
3. If the error message is still displayed: turn Landroid
®
off, turn Landroid
®
upside-down and check if there’s anything preventing the front wheels from
rotating.
4. Remove any possible object, turn Landroid
®
upright, turn Landroid
®
on.
Press
then .
Landroid
®
is upside
down.
Turn Landroid
®
upright. Press then .
Battery charging error
1. Check the battery temperature. If the temperature is too high, wait
until the temperature has cooled down. Press
then .
2. If the error message is still displayed, replace a new battery. Restart
Landroid
®
. Press then .
It takes too long for
Landroid
®
to go back to
the charging base.
Manually dock Landroid
®
in the charging base for charging. After
Landroid
®
is fully charged, Press then .
Landroid
®
is locked. Contact a service agent for help.
Error unknown.
Restart Landroid
®
. Press then . If the error message is still
displayed, contact a service agent for help.
NOTES
Before turning power on, always return Landroid
®
to its territory. If not, ” will be displayed. This message is also
displayed when Landroid
®
is sitting over the boundary wire when turned on.
If for any reason—i.e. a party, children playing...—you want to park your Landroid
®
in the charging base: Press then
. Landroid
®
will go to its charging base and stay there. Press to turn Landroid
®
off.
If an error repeatedly occurs in the same area of your lawn, you might have a problem with the boundary wire. Please
refer to the Installation Guide and check your set up with its help.
If your lawn is divided in two separate areas connected by a corridor less than 1m, one of which is not provided with
the charging base: when Landroid
®
runs out of charge, take it manually to the charging base, the charge process will
start.
If Landroid
®
runs abnormally once in a while, please try to restart it. If the problem is not resolved, try to removing and
reinstalling the battery . If the problem is still not resolved, please contact a WORX service agent for help.
Do not wash your Landroid
®
with a high pressure washer. This could cause damage to the battery or the machine.
12. Security
If Landroid
®
is connected to your smartphone, you can lock it on your smartphone. This prevents unauthorized people from
being able to use it.

Other manuals for Worx Landroid WR141E

Related product manuals