14
EN
Wed.11/29 09:00PM
STOP
Get familiar with the control panel
Landroid’s control panel provides the key functions in a minimalistic design.
For advanced functions, the free Landroid app provides further options in a richer interface: your smartphone.
NOW FOR THE EXCITING BIT!
START LANDROID FOR THE FIRST TIME.
Start Landroid
A. Place Landroid inside the boundary wire
B. Press
until the screen lights up. Then input the PIN code
C. Clockwise rotate the knob to select the number and short press
to confirm one by one. The screen will display ”PIN code OK”
D. Press the
, then press . Landroid will start mowing
E. You can stop Landroid at any time by pressing the
F. To send Landroid to the charging station, press the
, then press
Note: The default PIN code is 0000.
LANDROID CONTROL PANEL
Advanced functions via the built-in interface
Despite its minimalistic design, you can set several advanced functions through the built-in control panel.
However, for the best user experience we recommend you use the free Landroid app to do this, given its much richer and intuitive interface.
RETURN
Back to proceeding menu
POWER ON/OFF
Turns Landroid on and off
KNOB (Select and Enter)
DISPLAY
HOME
Sends Landroid to its charging
station during operation and
activates
START
start mowing
Wed.11/29 09:00PM
Wed.11/29 09:00PM
General setting
Language
Time format
Date format
Set time
1
2
Only for reference
1. Setting
A. Clockwise rotate
to enter setting
B. Then rotate
to choose “General settings ”/ ”working time ” /
”security
”, short press to enter.
C. Use the same method to take the follow-up actions.
To Next Page
Loading...
