Worx Landroid - 6.2 Keep It Clean

15
EN
3. Customize work time
A. Return to “working time”
B. Clockwise rotate
to “Customize work time” and short press to enter.
C. Clockwise rotate
to select day of the week and short press.
D. Then, press
to enter setting .
E. Clockwise rotate
to activate “Schedule #1*” . Short press to confirm.
F. Next, clockwise rotate
to select start time “hour/minute” and short press to
enter setting. Selected number will be blinking.
G. Rotate the
to select the start time you want your LANDROID to mow on a
particular day and short press to confirm. Use the same method to complete stop
time.
H. After that, clockwise rotate
and short press to enter “border cut”setting.
I. Rotate
to choose whether to activate “border cut” or not and short press to
confirm.
J. If you want to set “Schedule #2*”,use the same method above.
K. Press
and use same method to set other weekdays work time.
*Two schedules can be set in one day.
Customize work time
0h20min
0h20min
15h10min
4h0min
Sunday
Total:
Monday
Tuesday
Monday 6h30min
Scheduler #1 09:00-14:30
Border cut
Scheduler #2
1
2
Working time
Auto Work Time
Customize work zone
Customize work time
Define zones
1
2
1
2
1
2
Monday 6h30min
Scheduler #1 09:00-14:30
Border cut
Scheduler #2
Monday 6h30min
Scheduler #1 09:00-14:30
Border cut
Scheduler #2
Monday 6h30min
Scheduler #1 09:00-14:30
Border cut
Scheduler #2
Monday 6h30min
Scheduler #1 09:00-14:30
Border cut
Scheduler #2
1
2
Monday 6h30min
Scheduler #1 09:00-14:30
Border cut
Scheduler #2
Monday 6h30min
Scheduler #1 09:00-14:30
Border cut
Scheduler #2 14:30-14:30
Border cut
1
2
Set date & time
Date(dd/mm/yy):
Time(12h):
2020/07/07
08:37 PM
Set date & time
Date(dd/mm/yy):
Time(12h):
2020/07/07
08:37 PM
General setting
Language
Time format
Date format
Set date & time
1
2
1
2
1
2
Only for reference
Only for reference
* Be continuously updated according to the software version.
** For after-sales service only
General settings
Working time
Security
Navigation
Page *
Language
Time format
Date format
Set date & time
Rain start delay
App link
Diagnose**
Auto Work Time
Customize work time
Define zones
Customize work zone
Change PIN code
2. Set date & time
A. Return to “General settings”
B. Clockwise rotate
to “set date&time” and short press to enter.
C. Then, clockwise rotate
to select “dd” and short press .Selected number
will be blinking.
D. Next, rotate the
to select the number and short press to confirm. Use the
same method to complete “mm/yy/time”.