Worx Landroid - 3.4 How Efficiently Will My LandroidM Mow The Grass?

Lawn Mowing Robot EN
12
3.4 How Efficiently Will My
Landroid
®
M Mow The Grass?
The Landroid
®
M’s cutting height can be adjusted between 1.6”-4.0”.
The Blade disc can be assembled in two ways as per the grass
height.
The Blade disc assembled as the following way (on reverse side )
in Factory and the cutting height could be adjusted from 2.4” to 4.0”.
(See Fig. F1). If turn over the Blade disc assembly (See Fig. F2),
the cutting height could be adjusted from 1.6” to 3.1”.
Before starting your Landroid
®
M for the first time, you should cut
the grass to the height not more than 5 inches. Then make sure
you open the Control Panel Cover (7) and set the cutting height to
its maximum cutting height of 4 inches (See Fig. G1,G2).
Your Landroid
®
M will cut its best in dry weather. It does not like
wet grass, which can build up on the Blade Turning Disc (13) and
within the motor, and can also cause loose traction and slippage
while working.
Your Landroid
®
M is afraid of Lightening Storms. In case of a
Lightening Storm, protect the Landroid
®
M by unplugging the
Charging Base (4), disconnecting the Boundary Wire (21), and
making sure the Landroid
®
M is not allowed to charge.
Your Landroid
®
M loves mowing grass and requires the Cutting
Blades (14) to be kept in good condition to cut at its best. The
Landroid
®
M can do most things by itself, but will need your help
sometimes to prevent damage to itself.
• Never let the Landroid
®
M travel over gravel.
•
Remove or prevent access to obstacles that the Landroid
®
M
could accidentally climb on and damage its Blade Turning Disc.
• Remove all debris and foreign objects from your lawn.
G2
G1
F1
F2