TECHNICAL DATA
WG170 WG170.1 WG170.9
Voltage
20V
Max*
No load speed 7600 /min
Cutting Diameter 12"(30cm)
Line Diameter 0.065”(1.65mm)
Charging time 5 hrs 2 hrs /
Machine Weight 5.5 lbs 6.0 lbs 4.7 lbs
* Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts. Nominal voltage is 18 volts.
ACCESSORIES
WG170 WG170.1 WG170.9
Safety guard 1 1 1
Flower guard 1 1 1
Charger 1 (WA3742) 1 (WA3868) /
Battery pack 2 (WA3575) 2 (WA3578) /
Edger/Trimming support wheels 1 1 1
Spool 3 3 3
Spool holder 1 1 1
Only use the appropriate accessories intended for this tool. Accessory information can be found on the product
packaging, at a WORX dealer or on our website at www.worx.com.
WARNING: Any other accessory or attachment may increase the risk of injury.
To Next Page
Loading...
