Need help?Do you have a question about the Worx WA4300 and is the answer not in the manual?
Read and understand all instructions to avoid serious personal injury during operation.
Align and insert the extension pole handle into the shaft, then rotate the locking knob to secure.
Align and insert the extension pole into the saw, then secure using the clamping lever.
Loosen the clamping lever and press the release button to disconnect the extension pole from the saw.
Attach the pole, install battery, maintain firm footing, and use two hands for safe operation.
Start cuts with the chain against wood, use light pressure, and remove from cut with saw running.
To Next Page
General
