To Next PageTo Next PageWhat to do if Worx pole saw operates intermittently?
If your Worx pole saw operates intermittently, it could be due to overheating or applying too much pressure while cutting. Try placing the machine in a cool, ventilated place to cool it down. If this does not help, there may be a loose connection, defective internal wiring, or a defective on/off trigger. In these cases, contact a service agent.
Why my Worx pole saw fails to operate?
If your Worx pole saw fails to operate, it could be out of battery. Place the machine in a cool, ventilated place to cool it down. If the issue persists, the fuse may be faulty, and you should contact a service agent.
Why Worx WA0222 Pole Saw chain/chain bar over-heats?
If your Worx pole saw chain or chain bar overheats, it could be due to a clogged oil passage, the chain being over-tensioned, or a dull chain. To attempt a fix, place the machine in a cool, ventilated place to cool it down.
Warning to maintain a safe distance from overhead electrical power lines.
Advises awareness of falling branches and maintaining stable footing.
How to utilize the shoulder strap for improved balance and control during use.
General
