To Next PageTo Next PageHow to fix a dry chain on a Worx WG322?
A dry chain on your Worx Pole Saw may be caused by: * No oil in the reservoir. * A clogged vent in the oil filler cap. * A clogged oil passage. Check these to ensure proper lubrication.
Why does my Worx WG322 rip, vibrate, and not saw properly?
If your Worx Pole Saw rips, vibrates, or doesn't saw properly, the chain tension may be too loose, the chain might be dull or worn out, or the chain teeth could be facing the wrong direction. Check these aspects to resolve the issue.
What to do if the chain/chain bar over-heats on my Worx Pole Saw?
If the chain or chain bar of your Worx Pole Saw overheats, it could be due to several reasons: * There's no oil in the reservoir. * The vent in the oil filler cap is clogged. * The oil passage is clogged. * The chain is over-tensioned. * The chain is dull. Check these to address the overheating issue.
Why does my Worx WG322 Pole Saw fail to operate?
If your Worx Pole Saw fails to operate, it might be due to an out of battery or a faulty fuse. Check the battery and fuse to resolve this issue.
Why does my Worx Pole Saw operate intermittently?
If your Worx Pole Saw operates intermittently, it could be due to overheating, applying too much pressure while cutting, a loose connection, defective internal wiring, or a defective on/off switch. Check these components to troubleshoot the problem.
General| Type | Pole Saw |
|---|---|
| Voltage | 20V |
| Battery Type | Lithium-ion |
| Battery Capacity | 2.0 Ah |
| Power Source | Battery |
| Bar Length | 8 inches |
| Max Cutting Diameter | 6 in |
| Chain Pitch | 3/8 inch |
| Chain Gauge | .050 inch |
Guidelines for maintaining a clean, well-lit, and safe work environment.
Precautions for safe use of power tools involving electricity.
Ensuring operator alertness, common sense, and proper protective equipment.
Proper techniques for using and maintaining power tools.
Guidelines for safely using, charging, and maintaining battery packs.
Essential safety precautions for operating a chain saw.
Understanding and preventing kickback during chain saw operation.
Basic safety rules applicable to all gardening appliances.
Specific safety guidelines for battery-powered gardening tools.
Precautions for handling, storing, and disposing of battery packs safely.
Safety guidelines for operating the pole saw attachment.
Steps and precautions for safely felling a tree.
Techniques for making precise notching and felling back cuts.
Proper methods for removing branches from a fallen tree.
Safe and efficient techniques for cutting logs into lengths.
Required personal protective equipment for safe operation.
Key warnings related to tool operation and environmental hazards.
Key technical specifications for the chain saw models.
List of accessories provided or available for the tool.
Step-by-step guide for assembling the chain and guide bar.
Procedure for properly tensioning the saw chain.
Instructions for attaching and detaching the extension pole.
Procedure for filling the chain saw's oil reservoir.
How to verify the proper functioning of the automatic oiler.
Initial checks, preparation, and battery charging for cordless tools.
Steps to correctly install and remove the battery pack.
Procedure for turning the tool on and off.
Guidelines for safe and effective cutting with the chain saw.
Information on kickback and how to reduce the risk.
Techniques for safely holding and operating the chain saw.
Instructions for using the pole saw attachment for high branches.
Step-by-step guide for trimming branches from a living tree.
General maintenance procedures for the chain saw.
Guidelines for storing the chain saw when not in use.
Recommendations for maintaining the guide bar for optimal performance.
Procedure for cleaning the guide bar rails and oil passages.
Indicators that signal the need for chain and guide bar maintenance.
Why keeping the chain sharp is crucial for performance and safety.
Steps for lubricating the guide bar sprocket.
Common problems and their solutions for machine operation.
