1. MAiN HANDLE
2. AUXiLiARY HANDLE
3. UPPER LOCKING KNOB
4. LOWER LOCKING KNOB
5. AUXiLiARY HANDLE LOCKING LEVER
G. SAFETY GUARD
7. SPACER GUARD
8. EDGER WHEEL
9. LiNE CUTTER
10. TELESCOPIC SHAFT
11. CUTTING HF_D COVER (See M)
12. CAP RELEASE LATCH (See M)
13. SPOOL (See M)
14. CUTTING HF_D (See M)
15. EYELET (See M)
IG. LiNE FEED BUTTON (See L)
17. BATTERY PACK
18. BATTERY PACK RELEASE LATCH
19. CHARGER
20. CHARGED INDICATOR LIGHT(GREEN)
21. CHARGING INDICATOR LIGHT(RED)
TECNNICAL 9ATA
Model No. WG150
Rated Voltage 18V
Rated No-Load Speed 8200min -1
Cutting Diameter 10"
Line Diameter 0.065"
Machine Weight 6.81bs
ACCESSORIES
Uattery: 18V _ I.?Ah Ni_Cd 1pc
I hour charger: VoJtafjc 120V_GOHz 1pc
We recommend that you buy all your accessories from the store where you purchased the tool.
Use good quality accessories marked with a well known brand name. Choose the bits according
to the work you intend to undertake. Refer to the accessory packaging for further details. Store
personnel can also help and advise.
05
CTC-WG150-M-O6041&indd 5 2006-4-20 14:40:01
To Next Page
Loading...
Need help?
General
