How to fix a Worx WG184 when the cutting line is not feeding?
If the cutting line isn't feeding on your Worx Trimmer, manually feed the line. If that doesn't work, remove the spool and rewind the line. If the line is used up, replace it with a new spool.
Why my Worx WG184 Trimmer won't start?
Your Worx Trimmer might not start due to a discharged battery (recharge it, also see the content in charger manual), the battery being too hot or cold (allow it to cool or warm), a broken motor, or damaged internal wiring. Contact a service agent for motor or wiring issues.
Why my Worx Trimmer stopped working?
Your Worx Trimmer might have stopped working because the motor is broken, the battery isn't fully charged (recharge the battery), or the on/off switch is defective. Contact a service agent in the cases of broken motor or defective switch.
Why Worx WG184 Trimmer line keeps breaking?
There are several reasons why the line on your Worx Trimmer might be breaking. It could be due to a broken line, a battery that is not fully charged, a motor issue (resulting in low speed), or grass entangled around the cutting head. Replace the line, recharge the battery, remove any entangled grass, or contact a service agent if the motor is broken.
General| Power Source | Battery |
|---|---|
| Battery Voltage | 20V |
| Battery Type | Lithium-Ion |
| Cutting System | Dual-line |
| Cutting Width | 30 cm |
| Line Diameter | 1.6 mm |
| Weight | 2.3 kg |
To Next Page
