Why is the Worx WG183 Trimmer auto feed not working?
The Worx Trimmer's auto feed may not work because the cutting line isn't wound correctly, is tangled, or has run out. If the line is not wound well, manually feed the line; if that doesn't work, remove the spool and rewind the line. If the line is tangled, remove the spool and rewind it. If the line is used up, replace it with a new spool of line.
What to do if Worx Trimmer battery charge indicator is continuously lighting but no charging is possible?
If the battery charge indicator is continuously lit and charging isn't possible, it could be due to several reasons: the battery might not be properly inserted (insert the battery properly into the battery charger), the battery contacts might be contaminated (clean the battery contacts or replace the battery), or the battery could be defective (replace the battery).
What to do if Worx WG183 battery charge indicator does not light up?
If the battery charge indicator doesn't light up, it might be because the battery charger plug isn't fully plugged in (insert the mains plug fully into the socket outlet), or the socket outlet, mains cable, or battery charger is defective (check the mains voltage; have the battery charger checked by an authorized after-sales service agent).
General| Type | String Trimmer |
|---|---|
| Battery Voltage | 20V |
| Power Source | Battery |
| Battery Type | Lithium-ion |
| Line Diameter | 0.065 inches |
| Runtime | Up to 30 minutes |
| Line Feed | Automatic |
| Adjustable Handle | Yes |
| Bump Feed | Yes |
| Warranty | 3 years |
Read all safety warnings and instructions before operating the appliance.
Safety rules for general appliances and battery-operated gardening tools.
Additional safety guidelines specific to lawn trimmers and edge trimmers.
Critical warnings and precautions for handling and using the battery pack.
Understand the meaning of various symbols used in the manual for safety and operation.
Information on recycling Worx batteries through the RBRC program.
Lists all parts included in the tool package.
Details available accessories for the tool models.
Provides specifications and performance data for the tool.
Step-by-step guide for assembling the trimmer shaft, handle, and guard.
Instructions on how to install and remove the battery pack from the machine.
How to check the battery capacity using the indicator lights on the machine.
Explanation of how the automatic line feed system works during operation.
Instructions for manually feeding the trimmer line when needed.
Steps for removing the old spool and installing a new one.
Guide on how to manually wind the trimmer line onto the spool correctly.
Guidance on how to properly store the grass trimmer after use.
Recommendations for keeping the tool clean and functional.
Ambient temperature ranges for tool use, storage, and charging.
Common causes and corrective actions for the trimmer not operating.
Troubleshooting steps for intermittent trimmer operation.
Addressing causes and solutions for unusual vibrations or noise.
Reasons for short cutting time and how to resolve them.
Diagnosing and fixing issues where the machine fails to cut properly.
To Next Page
