To Next PageTo Next PageWhat to do if the Worx WG186E Trimmer motor is broken or the battery won't charge?
Recharge the battery if it's not fully charged. If the motor is broken or the On/Off switch is defective, contact Service Agent.
What to do if my Worx Trimmer is defective or the line spool isn't wound well?
If the machine is defective, contact Service Agent. If the line spool is not wound well, rewind the line. See ’ To fit spool and line assembly.’
Why is my Worx WG186E battery not lasting long, especially after storage or short charges?
If the battery hasn't been used for a long time or was only charged briefly, fully charge it, also see the content in charger manual. If the grass is too high, cut it in stages. If the battery is defective, replace it.
What to do if Worx WG186E Trimmer battery is discharged or the motor seems broken?
Recharge the battery; also see the content in charger manual. Allow the battery to cool or warm if it's too hot or cold. If the motor is broken or the internal wiring is damaged, contact Service Agent.
What to do if my Worx Trimmer battery is not working?
Ensure the battery is properly inserted into the battery charger. Clean the battery contacts or replace the battery if they are contaminated. Replace the battery if it is defective.
Why isn't my Worx WG186E battery charger working?
Ensure the mains plug is fully inserted into the socket outlet. Check the mains voltage; have the battery charger checked by an authorized after-sales service agent if you suspect it's defective.
Maintain a clean, well-lit work area free from flammable hazards.
Avoid contact with grounded surfaces and protect from water exposure.
Stay alert, use PPE, prevent accidental starts, and maintain proper balance.
General
