To Next Page
S
Spencer BellSep 12, 2025
What to do if grass entangled around cutting head of Worx WG184E?
- KKari MercadoSep 12, 2025
If grass is entangled around the cutting head of your Worx Trimmer, remove the grass.
What to do if grass entangled around cutting head of Worx WG184E?
If grass is entangled around the cutting head of your Worx Trimmer, remove the grass.
Why my Worx Trimmer battery not working?
If the battery is not properly inserted, insert it correctly into the battery charger. If the battery contacts are contaminated, clean them or replace the battery. If the battery is defective, replace it.
What to do if Worx WG184E Trimmer battery is not working?
If your Worx Trimmer battery isn't working, ensure it's properly inserted into the battery charger. Also, check the battery contacts; if they're contaminated, clean them or replace the battery. If the problem persists, the battery may be defective and need replacement.
How to fix Worx Trimmer if battery life is short?
If the battery hasn't been used for a long period or was only charged for a short time, fully charge it. If the grass is too high, cut in stages. If the battery is defective, replace it.
How to fix Worx WG184E cutting line?
If the cutting line is not wound well or the line is tangled, manually feed the line; if it still cannot feed out, remove the spool and rewind the line. If the line is used up, replace it with a new spool of line.
What to do if cutting line is not wound well on Worx WG184E?
If the cutting line on your Worx Trimmer is not wound well, manually feed the line. If it still cannot feed out, remove the spool and rewind the line.
What to do if socket outlet, mains cable or battery charger defective for Worx WG184E?
If the socket outlet, mains cable, or battery charger for your Worx Trimmer is defective, check the mains voltage and have the battery charger checked by an authorized after-sales service agent.
What to do if plug of Worx WG184E battery charger not plugged in properly?
If the plug of the battery charger for your Worx Trimmer is not plugged in properly, insert the mains plug fully into the socket outlet.
What to do if Worx WG184E battery was not in use for a long time?
If the Worx Trimmer battery has not been used for a long period or has only been charged for a short time, fully charge the battery. Additional information can be found in the charger manual.
What to do if Worx WG184E battery is not fully charged?
If the battery of your Worx Trimmer is not fully charged, try recharging it.
General| Power Source | Battery |
|---|---|
| Type | Cordless Grass Trimmer |
| Battery Voltage | 20 V |
| Battery Type | Lithium-ion |
| Cutting Width | 30 cm |
| Line Diameter | 1.65 mm |
| Runtime | Up to 30 minutes |
| Charging Time | 1 hour |
| Line Feed System | Automatic |
| Cutting System | Dual line |
Wear protective gear, avoid bad weather, and use in daylight or good artificial light.
Disconnect battery before maintenance, use recommended parts, inspect regularly.
Do not dismantle, short-circuit, expose to heat/fire, or subject to mechanical shock.
Dispose of packs separately, recharge only with specified chargers, and observe polarity.
Explains cutting head rotation after switch-off and waiting for it to stop.
Lists issues like non-operation, intermittent running, and provides corrective actions.
