How to fix Worx Trimmer when the battery is discharged or the motor is broken?
Recharge the battery, consulting the charger manual. Allow the battery to cool or warm to an appropriate temperature. If the motor is broken or the internal wiring is damaged, contact a service agent.
How to fix Worx WG183E Trimmer cutting line that is not wound well?
If the cutting line isn't wound well, manually feed the line; if that doesn't work, remove the spool and rewind the line. If the line is used up, replace it with a new spool.
What to do if Worx WG183E machine is defective or the line spool is not wound well?
If the machine is defective, contact a service agent. If the line spool is not wound well, rewind the line.
Why Worx WG183E Trimmer battery dies quickly?
If the battery hasn't been used for a long time or has only been charged for a short period, fully charge it, referring to the charger manual. If the grass is too high, cut it in stages. If the battery is defective, replace it.
Why is my Worx Trimmer battery charger not working?
Ensure the mains plug is fully inserted into the socket outlet. Check the mains voltage and have the battery charger checked by an authorized after-sales service agent if you suspect it's defective.
Read instructions, be familiar with controls and proper use.
Never operate near people/pets. Wear eye protection and stout shoes.
Use in daylight, with guards, switch on when clear, remove battery when unattended.
Remove battery for maintenance, use recommended parts, store out of reach of children.
Do not dismantle, short-circuit, expose to heat/fire, or subject to shock.
Wash affected area if liquid contacts skin/eyes. Seek medical advice if swallowed.
Keep clean/dry, charge before use, use correct charger, do not charge when not in use.
Dispose properly, do not mix cells, keep out of reach of children.
Instructions for assembling trimmer shaft, auxiliary handle, and safety guard.
Notes on using two batteries, recommended practice, and charging procedures.
Explanation of how the automatic line feed works and when to restart the trimmer.
Steps for manually feeding line and removing/replacing the spool cap.
Procedure for changing line spool and manually winding the line.
General| Type | String Trimmer |
|---|---|
| Power Source | Battery |
| Voltage | 20V |
| Battery Type | Lithium-ion |
| Battery Capacity | 2.0 Ah |
| Cutting Width | 30 cm |
| Line Diameter | 1.65 mm |
| Line Feed System | Automatic |
| Weight | 2.5 kg |
To Next Page
